Changing shocks
Changing shocks
Author
Discussion

bjarkes

Original Poster:

122 posts

215 months

Monday 27th April 2009
quotequote all
Hi Guys

How big a job is it to change shocks, it looks straigt forward is it?


Bjarke

sapper

1,134 posts

236 months

Monday 27th April 2009
quotequote all
I changed mine last week, very straight forward to change them, a bit of messing about to get the setting right, but worth while.

scotty_d

6,795 posts

225 months

Monday 27th April 2009
quotequote all
Mine where a pig to get out over the winter as the old bolts had never seen copper slip had to cut one bolt out with a air saw.

HRG

72,863 posts

270 months

Monday 27th April 2009
quotequote all
Lower bolt in the front wishbone is a tt, other than that it's as easy as it looks.

dogbucket

1,256 posts

232 months

Monday 27th April 2009
quotequote all
Did mine in an afternoon, worth getting a set of new bolts from Steve Heath.

bobfather

11,197 posts

286 months

Monday 27th April 2009
quotequote all
dogbucket said:
Did mine in an afternoon, worth getting a set of new bolts from Steve Heath.
Steve Heath blot set yes

I have done six pairs. As said above, the settling in is a pain, the springs settle down requiring the lower platform to be adjusted a couple of times. Setting the dampers is an art and will take you a long time to get the car as you want it. My advice is to get them somewhere near then fine tune the fronts using very small adjustments. When the front feels stable then do the rears. Changing the units is simple and the addition of a pair of spring compressors makes it easier still. It makes sense to lubricate the spring platform threads because adjustment under load puts a lot of sheer force on the threads and there is a possibility that the treads will bind.

Edited by bobfather on Monday 27th April 15:08