Rear hubs,confrimation needed,please.
Rear hubs,confrimation needed,please.
Author
Discussion

Simon Says

Original Poster:

19,466 posts

252 months

Tuesday 28th April 2009
quotequote all
Can anyone please confirm if the rear hubs are different from solid rear disc to later vented rear,as i am upgrading mine to the later seeing as i have Cosworth fronts wink thanks in advance,it will save me removing the wheels on my brothers car to have a measure up,obviously i know the disc are 20mm bigger but need to know weather ford pushed the caliper further out with the caliper carriers or the hub bolt spacings.

Barkychoc

7,848 posts

235 months

Tuesday 28th April 2009
quotequote all
If no-one can confirm I'd speak to a brake supplier - someone like http://www.brakeparts.co.uk - I've used these for a few parts and have spoken to a guy there called Mitch who was very helpful.
Their website is also useful - you can look up various models parts (Ford) to compare part numbers.

AntonyJ

5,254 posts

312 months

Tuesday 28th April 2009
quotequote all
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.

Simon Says

Original Poster:

19,466 posts

252 months

Tuesday 28th April 2009
quotequote all
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
I suspected the calipers are not moved out by just the carriers scratchchin i will have to look out for a couple of bearing carriers then,i have just bagged two NOS ford calipers from a cossie Sierra/Granada for vented discs so i will have a hunt around,one of my handbrake mechanisms is lazy and could not see the point of just staying with the solids and getting new/recon calipers,thank you very much chaps much appreciated beer

SMB

1,523 posts

297 months

Tuesday 28th April 2009
quotequote all
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
The Uprights are also different so you will have to source from a later car.

AntonyJ

5,254 posts

312 months

Tuesday 28th April 2009
quotequote all
SMB said:
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
The Uprights are also different so you will have to source from a later car.
How are the uprights different?

I have 500 spec brakes fitted to my '92 car on original uprights.

Edited by AntonyJ on Tuesday 28th April 19:39

Simon Says

Original Poster:

19,466 posts

252 months

Wednesday 29th April 2009
quotequote all
AntonyJ said:
SMB said:
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
The Uprights are also different so you will have to source from a later car.
How are the uprights different?

I have 500 spec brakes fitted to my '92 car on original uprights.

Edited by AntonyJ on Tuesday 28th April 19:39
Uprights are the same yes its just the bearing carriers i need have checked now thumbup got to source a pair of them hub carriers and then i can fit the new wheel bearings that i have had for the last 12 months at the same time.

Edited by Simon Says on Wednesday 29th April 10:12

SMB

1,523 posts

297 months

Wednesday 29th April 2009
quotequote all
AntonyJ said:
SMB said:
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
The Uprights are also different so you will have to source from a later car.
How are the uprights different?

I have 500 spec brakes fitted to my '92 car on original uprights.

Edited by AntonyJ on Tuesday 28th April 19:39
Happy to stand corrected, working from what everyone told me when I asked some time back. So can someone confirm a list of parts and part numbers required?

Simon Says

Original Poster:

19,466 posts

252 months

Thursday 30th April 2009
quotequote all
SMB i will let you know shortly as i am currently uprating the rears to vented and 273mm discs wink

Uncle Fester

3,114 posts

239 months

Thursday 30th April 2009
quotequote all
Exactly which Ford hubs were fitted front and rear?

I've seen some lightweight alloy hubs, available for several different Ford models. Price was about £60.

If you're changing hubs anyway, then fit alloy to reduce the unsprung weight and improve handling.


kabaman

198 posts

270 months

Thursday 14th May 2009
quotequote all
I've just done this on my Griff 4.0, gone from 253 solid to 273 vented. On my car it required:

New bearing carriers - I think you just need a later 2wd Cossie or a Mondeo V6, I found an "RS breaker" and told him I wanted 273mm disc compatible bearing carriers. There's someone selling brand new calipers suitable for vented discs on ebay for £110 or thereabouts, and 273mm vented discs you can get anywhere.

So I strongly suspect just a bearing carrier change on your car too.

Neil

Simon Says

Original Poster:

19,466 posts

252 months

Thursday 14th May 2009
quotequote all
kabaman said:
I've just done this on my Griff 4.0, gone from 253 solid to 273 vented. On my car it required:

New bearing carriers - I think you just need a later 2wd Cossie or a Mondeo V6, I found an "RS breaker" and told him I wanted 273mm disc compatible bearing carriers. There's someone selling brand new calipers suitable for vented discs on ebay for £110 or thereabouts, and 273mm vented discs you can get anywhere.

So I strongly suspect just a bearing carrier change on your car too.

Neil
Yep,i got those calipers new too,what RS breaker please Kabaman? thanks.