Yikes! Wrong Fuel Map??!??!
Yikes! Wrong Fuel Map??!??!
Author
Discussion

debaron

Original Poster:

878 posts

228 months

Wednesday 29th April 2009
quotequote all
Just had the ECU loom out to investigate the Tune Resistor. Unplugged and took reading across the resistor - 3.9 K Ohms! I was under the impression that in a CAT car it was 400 Ohms. Mines a 96 Serp and definitely has Cats.

Have I got this the wrong way round or has my car been fitted with a Non-Cat tune resistor. Pics below.

Cheers.

Ryan








blitzracing

6,422 posts

251 months

Wednesday 29th April 2009
quotequote all
Thats cat tune, white wires- referred to as white tune sometimes- no worries

Pasco

6,652 posts

259 months

Wednesday 29th April 2009
quotequote all
blitzracing said:
Thats cat tune, white wires- referred to as white tune sometimes- no worries
Yep would have been green wires if non cat tune resistor fitted.

Referred to as Green tune sometimes smile

Barkychoc

7,848 posts

235 months

Wednesday 29th April 2009
quotequote all
Shamelessly borrowed from http://www.britishv8.org/Articles/Rover-14CUX-EFI....

The following information on Tune Resistors is based on Rover service literature. 

Visual inspection of wire color codes will allow you to quickly differentiate between resistors.
White 3900 Ohms USA and European vehicles with catalytic converters
Green 470 Ohms UK and European vehicles without catalytic converters
Yellow 910 Ohms Saudi vehicles (without catalytic converters.)
Red 180 Ohms Australia and "the rest of the world."


Note: all four types of Rover Tune Resistors were rated for 0.5 Watts.