Coil Replacement?
Coil Replacement?
Author
Discussion

aidanbree

Original Poster:

298 posts

234 months

Thursday 30th April 2009
quotequote all
I have been having an issue with my 94 4.0 Chim (one of many) whereby the car has been cutting out and running very rough. When I get above 3500 rpm it can often be hesitant.

An alarm specialist has looked at the car and suggested that I need to have the coil replaced. Can anyone point me to the correct replacement part?

Is this a difficult job or will I have to put it into a garage to replace? I don't mind getting my hands dirty providing it requires relatively no skill!

Cheers and thanks again in advance for all the info you guys provide!

Aidan

scotty_d

6,795 posts

225 months

Thursday 30th April 2009
quotequote all
http://www.racetechdirect.co.uk/product-subsection...

http://www.tvrcarparts.com/pages/parts.asp?vehicle...

http://www.clever-trevor.net/part/103/ignition-coi...

I went for the last one i think i got mine a bit cheaper from ebay. Its very straight forward job can do it your self takes 10mins ish

Edited by scotty_d on Thursday 30th April 11:15

chrispitman

742 posts

285 months

Thursday 30th April 2009
quotequote all
Try your local motor factors or 4x4 place, they should have one on the shelf think there off the 3.5/3.9 engine.

Try these
Land Rover Part - PRC 6574
Bosch Part - 0 221 122 392

Edited by chrispitman on Thursday 30th April 11:48

dogbucket

1,256 posts

232 months

Thursday 30th April 2009
quotequote all
cheapest Bosch one I could find when I got mine is from here

just make sure you get the + - back on the right way round

aidanbree

Original Poster:

298 posts

234 months

Thursday 30th April 2009
quotequote all
Thanks for the part number Chris!

My local parts supplier has an Intermotor one for 22 quid. I presume that this will do the job? Any major difference between this and a Bosch?

Simon Says

19,466 posts

252 months

Thursday 30th April 2009
quotequote all
aidanbree said:
Thanks for the part number Chris!

My local parts supplier has an Intermotor one for 22 quid. I presume that this will do the job? Any major difference between this and a Bosch?
Dont use Inter*otor they are ste,just go with the Bosch unit you get what you pay for,and yes i speak from many years in the M/Trade wink never cut corners with things like this it will leave you stranded eek pay now or pay later biggrin

Edited by Simon Says on Thursday 30th April 13:05

Karussell

157 posts

275 months

Thursday 30th April 2009
quotequote all
Hi there,

Give TVR Power a call.

£17 for a Bosch coil, + next day delivery.

Did mine last week. Took about 1/2 hour

M

aidanbree

Original Poster:

298 posts

234 months

Friday 1st May 2009
quotequote all
Tried TVR Power however they no longer stock the Bosch unit. They suggested they had a non-branded but manufactured by the same people who make the Bosch coil however they didn't have it in stock. I was a little wary at that....

Famous Four had it in stock and I think it was delivered this morning (unfortunately at work!)

Will have a go at fitting (noting polarity) over the weekend

Thanks again folks

Cheers

Aidan

mt10argyll

407 posts

242 months

Friday 1st May 2009
quotequote all
Simon Says said:
aidanbree said:
Thanks for the part number Chris!

My local parts supplier has an Intermotor one for 22 quid. I presume that this will do the job? Any major difference between this and a Bosch?
Dont use Inter*otor they are ste,just go with the Bosch unit you get what you pay for,and yes i speak from many years in the M/Trade wink never cut corners with things like this it will leave you stranded eek pay now or pay later biggrin

Edited by Simon Says on Thursday 30th April 13:05
I have used Intermoto coil for four years no problem

Al 450

1,390 posts

252 months

Friday 1st May 2009
quotequote all
I got a flamethrower coil from Demon Tweeks, seems to do the job well and it's shiny!!!


MADMAX2

2,336 posts

225 months

Sunday 3rd May 2009
quotequote all
Al 450 said:
I got a flamethrower coil from Demon Tweeks, seems to do the job well and it's shiny!!!

have u got the link and the exact price al?

cheers

ian

aidanbree

Original Poster:

298 posts

234 months

Monday 4th May 2009
quotequote all
Changed the coil yesterday....what a difference! All very smooth and no issues. Unfortunately the clip holding the coil is going to need some manipulation if I am going to fit that second bolt!

Cheers

Aidan

Al 450

1,390 posts

252 months

Monday 4th May 2009
quotequote all
MADMAX2 said:
Al 450 said:
I got a flamethrower coil from Demon Tweeks, seems to do the job well and it's shiny!!!

have u got the link and the exact price al?

cheers

ian
http://www.demon-tweeks.co.uk/products/ProductDeta...

£43.70, not cheap but as I mentioned it's shiny!!

scotty_d

6,795 posts

225 months

Monday 4th May 2009
quotequote all
Not a bad price to pay for engine bing biggrin I red bulled mine cos i am tight

blitzracing

6,422 posts

251 months

Monday 4th May 2009
quotequote all
A word of caution about the flame thrower coil, there is a past post where a guy had all sorts of problems with one, and the problem is the RV8 system has a resistance wire feeding the coil, so you only normally see about 9 volts. I dont know how the flamethrower coils cope with ballast resistors, as they come in various primary impedences. Basically the lower the resistance, the more current the coil draws, (More power) but with a ballast resistor the more voltage is dropped as the coil resistance drops, so you might only end up with say 6 volts, which will compleatly destroy the reason for having a higher voltage coil in the first place. You could feed it with a 12 volt supply, but Id expect this to exceed the ignition amps switching ability fairly rapidly.

Mark