Weird central locking fault
Weird central locking fault
Author
Discussion

Robrine

Original Poster:

124 posts

212 months

Friday 1st May 2009
quotequote all
Anyone help with this one??

My 94 Chim used to central lock off both buttons on the fob. Left (I assume) for locking with out the sensors on for parking with the roof off, and right button to lock and set sensors.

For some reason the right button has stopped working, but the left on works fine.

The C/L will set ok manualy, and I can hear the relays clicking when I press either of the door sill switches. The light on the key fob lights when I press either of the bottons on it.

Is it possible for the fob to have gone chips on only one button (or code/frequency) ??? Or am I being a numpty confused

Many thanks PH'ers, failing that I think it might be time to call someone who knows about these things, Carl Baker's got a good rep on here phone

Ribol

12,000 posts

289 months

Friday 1st May 2009
quotequote all
I thought on those remotes both buttons did exactly the same thing other than one button being silent whilst the other chirps.

Two button remotes are usually on the early Foxguard alarms.

Robrine

Original Poster:

124 posts

212 months

Friday 1st May 2009
quotequote all
Neither of mine chirps!! confused

Ribol

12,000 posts

289 months

Friday 1st May 2009
quotequote all
Robrine said:
Neither of mine chirps!! confused
The chirp can be enabled/disabled on the alarm unit itself, dipswitch 4 IIRC.

Robrine

Original Poster:

124 posts

212 months

Saturday 2nd May 2009
quotequote all
Is it possible that it has just got out of sync with the codes??
Im guessing it would transmit the same code no matter what button you pressed on the fob, so it should work.

Is there anyway of re-setting the fob, or should I try the disconnecting the battery trick??

TVRs are fun, arnt they spin

Ribol

12,000 posts

289 months

Saturday 2nd May 2009
quotequote all
Robrine said:
Is it possible that it has just got out of sync with the codes??
Im guessing it would transmit the same code no matter what button you pressed on the fob, so it should work.

Is there anyway of re-setting the fob, or should I try the disconnecting the battery trick??
It isn't a sync issue, both buttons should turn the alarm on/off in exactly the same way - chirps asside.

If one button isn't working it will be down to the remote itself. Disconnecting the battery in this situation isn't going to do anything.

If you have another working remote then I wouldn't worry about it. If you haven't then this would be a good time to buy one, you can add up to 4 on this type of alarm and they are available.

Robrine

Original Poster:

124 posts

212 months

Saturday 2nd May 2009
quotequote all
OK, thought as much, time to splash some more of my hard earned on TVR bits biggrin
Thnaks for your help Ribol, much appreciated bow

lewis_sharman

5,958 posts

222 months

Saturday 2nd May 2009
quotequote all
Can you get aftermarket fobs that you can program into the alarm? I only have 1 tatty fob and 1 with no buttons frown

It would definately be nice to get a standard new one and just set it up for the car, if that is possible?

Edited by lewis_sharman on Saturday 2nd May 12:07

Ribol

12,000 posts

289 months

Saturday 2nd May 2009
quotequote all
lewis_sharman said:
Can you get aftermarket fobs that you can program into the alarm? I only have 1 tatty fob and 1 with no buttons frown

It would definately be nice to get a standard new one and just set it up for the car, if that is possible?
Just get one for whatever make of alarm you have and sync it on.

It is certainly possible for the Foxguard being discussed here and no doubt is with other makes of alarms too.