Anyone got a magic solution to decoking heads & pistons?
Discussion
Paraffin works fine, bit of nitromors for tough bits. Steam cleaner is fine for degreasing, but it doesn't shift the coke very well - and you have to really dry then oil everything afterwards...
Generally I just soak stuff in paraffin in an old water header tank (nice & big) and have a solvent gun with pickup pipe to blast the messy & internal bits. Must admit I try & leave stuff for a few days just agitating occasionally..
Die grinders and burrs make much shorter work of the stuff of though


Generally I just soak stuff in paraffin in an old water header tank (nice & big) and have a solvent gun with pickup pipe to blast the messy & internal bits. Must admit I try & leave stuff for a few days just agitating occasionally..
Die grinders and burrs make much shorter work of the stuff of though



Cellulose thinners(gunwash)always worked well for me it strips the carbon out of all the nooks and crannies(keep away from painted surfaces and plastic)especially the piston ring grooves and works overnight but please read the instructions and it is highly volatile
be warned,if unsure use chemicals already mentioned 
be warned,if unsure use chemicals already mentioned 
It sounds like I'm on the right track.
I've got a water header tank with about 35 litres of degreaser in it (the dilutable variety from Machine Mart), this is pumped from one end of the tank to the other using a 6 metre head central heating pump (thats the V8 version
) - this creates a hell of a current and is bloody brilliant at degreasing pretty much anything if left on overnight - rocker covers come out like new. It hardly uses any power either.
You do need the return to the tank to be under the surface - otherwise speaking from experience the froth gets totally out of control
The coke in the heads is significantly softened but I was reluctant to go too mad as the heads are alloy, I assume I am OK with the decoke wire brushes then if I'm careful.
I have a steam cleaner but it didn't touch the coke, and tends to move the oil around a bit, and what comes off tends to go in your face!
It also makes your garage look like a loco shed with all that steam!
A few anorak pics below
Degrease Tank

Pump under tank, it helps if you have a neighbour thats a plumber and wants some motorbike bits degreasing
Mounted on a pair of old speaker stands.
I've had the pump kicking around for years - so it's about time it was put to good use.
No doubt the central heating pump will pack up next week.

One Rocker cover 24 hours later.
I don't have a before pic but this was really bad - if you've ever tried to clean a bad rocker cover you'll know this is a miracle! (Its not off my car BTW).

I've got a water header tank with about 35 litres of degreaser in it (the dilutable variety from Machine Mart), this is pumped from one end of the tank to the other using a 6 metre head central heating pump (thats the V8 version
) - this creates a hell of a current and is bloody brilliant at degreasing pretty much anything if left on overnight - rocker covers come out like new. It hardly uses any power either.You do need the return to the tank to be under the surface - otherwise speaking from experience the froth gets totally out of control

The coke in the heads is significantly softened but I was reluctant to go too mad as the heads are alloy, I assume I am OK with the decoke wire brushes then if I'm careful.
I have a steam cleaner but it didn't touch the coke, and tends to move the oil around a bit, and what comes off tends to go in your face!
It also makes your garage look like a loco shed with all that steam!
A few anorak pics below
Degrease Tank

Pump under tank, it helps if you have a neighbour thats a plumber and wants some motorbike bits degreasing

Mounted on a pair of old speaker stands.
I've had the pump kicking around for years - so it's about time it was put to good use.
No doubt the central heating pump will pack up next week.

One Rocker cover 24 hours later.
I don't have a before pic but this was really bad - if you've ever tried to clean a bad rocker cover you'll know this is a miracle! (Its not off my car BTW).

Edited by Barkychoc on Tuesday 5th May 09:51
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



