bodyoff update
Discussion
The chassis and wishbones etc were shot blasted and spray painted straight after with zinc phosphate 2 pack primer, I have since applied a further 4 brush coats of zinc phosphate primer, alternating between grey and red oxiode to ensure good coverage. A spray finish may look better but i just wanted plenty of paint on there, The finish is high gloss machinery enamel from a paint specialist in sheffield. very similar properties to hammerite etc, Im tempted to apply a clear lacquer on the outriggers etc for a bit more protection, Tom,
very good looking job and nicely finished. Unfortunately I will have to do the same over winter. Not that I am lazy or not capable of doing it, but the thought of all the other parts that need doing ( brakes, dampers, polybushes, steering leaks, exhaust mod, new wishbones...) combined with the little spare time I have I simply don't know what to do.
Throw real money at somebody (which I hardly have at the moment) to do the job and enjoy my car next summer again, or doing ot all myself and having to drive my diesel saloon next summer.
Throw real money at somebody (which I hardly have at the moment) to do the job and enjoy my car next summer again, or doing ot all myself and having to drive my diesel saloon next summer.
I might start touting for business as a kitchen fitter
approx cost of shotblast, anything from £75 to £140 depending on the type of blast used. Mine was £ 180 to degrease, shot blast [coarse grit] and glass bead blast [fine] and spray straight after with 2 pack high build epoxy. Not cheap but a very good job ,Tom.
approx cost of shotblast, anything from £75 to £140 depending on the type of blast used. Mine was £ 180 to degrease, shot blast [coarse grit] and glass bead blast [fine] and spray straight after with 2 pack high build epoxy. Not cheap but a very good job ,Tom.Gassing Station | Chimaera | Top of Page | What's New | My Stuff









Looks a great job! Out of interest, what's the going rate for a chassis to be blasted?