Deeply dippy
Deeply dippy
Author
Discussion

schmokin1

Original Poster:

1,223 posts

243 months

Tuesday 5th May 2009
quotequote all
got main beam and side lights but no dipped. Have checked the relay for continuity and checked it clicks when the dash switch is pressed. Anyone any suggestions apart from the obvious of pulling the lightbulbs and checking that the feed goes live when the switch is pushed?

Cheers all
Schmo

K4TRV

1,819 posts

283 months

Tuesday 5th May 2009
quotequote all
Sorry to be "obvious", but you didn't mention it..... but the left hand stalk controls dipped & Main. Check there to ensure it is switching before crawling through grill !!

Trev


Barkychoc

7,848 posts

235 months

Tuesday 5th May 2009
quotequote all
And although unlikely also check the bulbs - a friend and I spent ages trying to sort his faulty brake lights.
It was the bulbs. Both of them. irked

Justin_Tvr

574 posts

216 months

Tuesday 5th May 2009
quotequote all
I had exactly the same problem, it was a vauxhall indicator/light stalk that was needed a 30min job to fix.

schmokin1

Original Poster:

1,223 posts

243 months

Wednesday 6th May 2009
quotequote all
ok so it might be the stalk, but where does the dipped beam relay on the fuseboard in the footwell come into it? I was thinking along the lines that you turn on the sidelights and dipped beam from the radio panel right hand two pushbuttons (and I hear the dipped relay click) and the stalk activates main as well as dipped? Am i barking up the wrong tree here?

K4TRV

1,819 posts

283 months

Wednesday 6th May 2009
quotequote all
There's a dipped beam relay and a main beam relay on the fuse board.

It would seem logical that the stalk when towards you it powers the dipped relay and when pushed away from you, the main beam. It will also "flash" main beam when pulled towards you when on dip.

I think my dip remains on when the main beam is "flashed".

Check the stalk and swop relays ??

Trevbiggrin