Will using Nitrous Oxide wreck my engine?
Will using Nitrous Oxide wreck my engine?
Author
Discussion

Benjaminpalma

Original Poster:

1,214 posts

213 months

Wednesday 6th May 2009
quotequote all
I only use my 450 on weekends for laughs. The roads here on Mallorca are smooth, usually dry and very inviting. They do loads of car ads here - with good reason. And there are plenty of straight bits for safe blasting. I'm quite tempted by the idea of a flick-of-the-switch NOS kit to out-blast German tossers in their German Euroboxes.

shoottankshoot

Will it damage my engine in the long term with occasional use?

Are they easy to remove if I get bored of it( or the Guardia Civil take a dim view of it)?

Thanks, peeps.

dbv8

8,676 posts

251 months

Wednesday 6th May 2009
quotequote all
Checkout the 'Wizards of Nos' forum site for all the advice you need.
I would recommend these systems and they are very reliable and safe.

A 50 bhp shot would provide that little extra boost and would not cause any damage, especially to a v8.
I have been using nitrous a lot for the last 6 months and currently use 150 bhp jets at the drag strip.
With a set of colder plugs and maybe retarding the ignition a little then all should be fine.

I say buy a 'WON' kit, fit and enjoy.

Benjaminpalma

Original Poster:

1,214 posts

213 months

Wednesday 6th May 2009
quotequote all
Thanks. Do the refills cost much?

dbv8

8,676 posts

251 months

Wednesday 6th May 2009
quotequote all
Couldnt tell you about refills on the continent but in the UK usually £55 to refill an 11lb bottle.
Used occasionally with 50 bhp jets a bottle should last you a good few weeks. Or maybe just the 1st weekend biggrin.
I now have a 50 ltr bottle delivered to my home from nitrous supplies and can refill my 11 lb bottles over 10 times before getting them to bring a replacement. In the long term if you use a lot of gas this works out at a good saving.

macdeb

8,760 posts

286 months

Wednesday 6th May 2009
quotequote all
If you're serious, it will be worth investing in a 'progressive controller' as it gives the clutch and gearbox a chance to keep up as there is a sudden increase in torque. As said, retard ignition to save detonation [around 1 degree per 50 hp increase]
Derek, how did you get on Sunday?

dbv8

8,676 posts

251 months

Thursday 7th May 2009
quotequote all
Hi Mac,
despite the weather i managed a few PBs.
0-60 mph in 3.95 and the 1/4 in 12.17 @ 116.8.
The nitrous system is working really well now and im visiting Eann for the torqueflow kit on the 23rd then off to York that night.
I will report back on the results.

bobfather

11,197 posts

286 months

Thursday 7th May 2009
quotequote all
I'm not an expert on the application of NOS but as an engineer I would suggest that you consider the impact of the increased energy on the devices that hold the drive chain in place and those that transmit the power to the tyres.

The engine mounts are already a week point and so would become more liable to tearing; you can buy mounts with mechanical support which should help. Diff top bush could split poly option for this. I don't know if people apply NOS in fifth gear but I would suggest you avoid it, fifth gear is an add-on to the gear box and is a known week point. Half shaft failure is also known to occur. These things fail under extreme load, increasing that load will surely increase the likelihood of failure.

dbv8

8,676 posts

251 months

Thursday 7th May 2009
quotequote all
Good points there bobfather.
I will check my mounts and look into relacing any weak parts.
I run through the 1/4 mile in 4th with a few rpm to spare so 5th is not necessary.
I also use a progressive controller which can be set to feed the power in from a fixed percentage over a set time.
This is necessary when running higher bhp jets as ive lost traction on the drag strip when changing to 3rd, never mind 1st and 2nd, and thats with warmed up Toyo R888's.

Benjaminpalma

Original Poster:

1,214 posts

213 months

Thursday 7th May 2009
quotequote all
bobfather said:
I'm not an expert on the application of NOS but as an engineer I would suggest that you consider the impact of the increased energy on the devices that hold the drive chain in place and those that transmit the power to the tyres.

The engine mounts are already a week point and so would become more liable to tearing; you can buy mounts with mechanical support which should help. Diff top bush could split poly option for this. I don't know if people apply NOS in fifth gear but I would suggest you avoid it, fifth gear is an add-on to the gear box and is a known week point. Half shaft failure is also known to occur. These things fail under extreme load, increasing that load will surely increase the likelihood of failure.
Thanks. Exactly the sort of thing I was concerned about.

But... it would be laugh once set up... I notice one of the kits has a fighter-jet style 'protected' arming switch. How cool is that?music

im

34,302 posts

248 months

Thursday 7th May 2009
quotequote all
Who will you use for insurance?

I don't know how anyone gets Insurance in the UK for a NOS kit on a car thats used on the public roads.

I wouldn't even want to ask for a quote for that hehe

dbv8

8,676 posts

251 months

Thursday 7th May 2009
quotequote all
I believe Adrian Flux covers nitroused cars.

Benjaminpalma

Original Poster:

1,214 posts

213 months

Thursday 7th May 2009
quotequote all
im said:
Who will you use for insurance?

I don't know how anyone gets Insurance in the UK for a NOS kit on a car thats used on the public roads.

I wouldn't even want to ask for a quote for that hehe
Maybe a reason to be able to remove the kit quickly?! judge

jsr

1,155 posts

281 months

Friday 8th May 2009
quotequote all
dbv8 said:
Hi Mac,
despite the weather i managed a few PBs.
0-60 mph in 3.95 and the 1/4 in 12.17 @ 116.8.
The nitrous system is working really well now and im visiting Eann for the torqueflow kit on the 23rd then off to York that night.
I will report back on the results.
That is impressive, dbv8. Only very marginally slower than a Nissan GTR

macdeb

8,760 posts

286 months

Friday 8th May 2009
quotequote all
dbv8 said:
Hi Mac,
despite the weather i managed a few PBs.
0-60 mph in 3.95 and the 1/4 in 12.17 @ 116.8.
The nitrous system is working really well now and im visiting Eann for the torqueflow kit on the 23rd then off to York that night.
I will report back on the results.
Cool, let me know how you get on after Eanns bit of fiddling.

dbv8

8,676 posts

251 months

Saturday 9th May 2009
quotequote all
I will run the car without nitrous for the 1st couple of runs to compare to a good NA run at the last meeting of 13.2 @ 104.
Any additional power should show in a higher terminal speed.
eg + 20bhp would give 12.9 @ 107

With the gas now giving me a genuine 100bhp (calculated from the last meeting) i should be able to run an 11.9 at over 118. Its just a case of good weather, a good launch and no missed gearchanges.

GreenV8S

31,027 posts

315 months

Saturday 9th May 2009
quotequote all
dbv8 said:
This is necessary when running higher bhp jets as ive lost traction on the drag strip when changing to 3rd, never mind 1st and 2nd, and thats with warmed up Toyo R888's.
The transmission doesn't have much margin, so you want to treat it gently. One of the worst things for the transmission is shock loads from dumping the clutch under power, or landing on a spinning wheel etc. This will cause problems way before the sustained load is high enough to damage the transmission.

If you're spinning the wheels as you change gear, this suggests you might be bringing the clutch in suddenly without matching the revs, and that's a habit you want to get out of if you want the transmission to last.

dbv8

8,676 posts

251 months

Saturday 9th May 2009
quotequote all
GreenV8S said:
If you're spinning the wheels as you change gear, this suggests you might be bringing the clutch in suddenly without matching the revs, and that's a habit you want to get out of if you want the transmission to last.
I tend to try to come off the line without any wheelspin then get to full throttle as quick as possible. I dont tend to wheelspin on the gearchange but if the track isnt dry or warm enough then the jump in torque from the nitrous can cause wheelspin. Thats why its important for me to set the progressive controller just right. Too much nitrous too soon = wheelspin, not enough and im not going to break any records and after all thats what im striving for.