Rocker gear run-in?
Rocker gear run-in?
Author
Discussion

Chimjunkie

Original Poster:

2,879 posts

242 months

Friday 15th May 2009
quotequote all
Just fitted new shafts and rockers. Any need to do a prolonged run-in? Or just drive it like i stole it. I.e normal smile


wrightp

97 posts

275 months

Friday 15th May 2009
quotequote all
Hi
What assembly did you end up getting, OE, Aftermarket, Second hand?

What did the new rocker assembly sound like when you started the engine?

If silent (Preload within limits) then I would be tempted to drive it as job done. If there are tapping noises I would go for short drive and recheck.

Phil.

Chimjunkie

Original Poster:

2,879 posts

242 months

Friday 15th May 2009
quotequote all
wrightp said:
Hi
What assembly did you end up getting, OE, Aftermarket, Second hand?

What did the new rocker assembly sound like when you started the engine?

If silent (Preload within limits) then I would be tempted to drive it as job done. If there are tapping noises I would go for short drive and recheck.

Phil.
Got shaft and rockers from RPI in the end. Been told they sell quality stuff. But the shafts did not have a mark indicating installation position, and only two of the rockers were the same as those that came off. All the parts looked ok though. VERY noisy on start up for a short while as i drained the followers down to set the preload. Sounds better now after 30 miles. Have a 350 mile round trip tomorrow on new R888's so will be taking it easy for 100 miles or so anyway.

clive f

7,259 posts

264 months

Friday 15th May 2009
quotequote all
I`d do a few hundred miles then take off the rocker covers and double check the rocker pads just to be on the safe side, I did exactly the same as you 3 years ago and the rockers only lasted 400 miles!
RPI put it down to a dodgy batch hehe

Chimjunkie

Original Poster:

2,879 posts

242 months

Friday 15th May 2009
quotequote all
clive f said:
I`d do a few hundred miles then take off the rocker covers and double check the rocker pads just to be on the safe side, I did exactly the same as you 3 years ago and the rockers only lasted 400 miles!
RPI put it down to a dodgy batch hehe
Going down south this saturday on my family rounds. Can pop over to Isle of Widgit if you about in the morning Clive? YHM

Seasider

12,728 posts

280 months

Friday 15th May 2009
quotequote all
Chimjunkie said:
clive f said:
I`d do a few hundred miles then take off the rocker covers and double check the rocker pads just to be on the safe side, I did exactly the same as you 3 years ago and the rockers only lasted 400 miles!
RPI put it down to a dodgy batch hehe
Going down south this saturday on my family rounds. Can pop over to Isle of Widgit if you about in the morning Clive? & you can check the pads for me hehe
EFA

Chimjunkie

Original Poster:

2,879 posts

242 months

Friday 15th May 2009
quotequote all
Seasider said:
Chimjunkie said:
clive f said:
I`d do a few hundred miles then take off the rocker covers and double check the rocker pads just to be on the safe side, I did exactly the same as you 3 years ago and the rockers only lasted 400 miles!
RPI put it down to a dodgy batch hehe
Going down south this saturday on my family rounds. Can pop over to Isle of Widgit if you about in the morning Clive? & you can check the pads for me hehe
EFA
hehe Only if he insists and replies to my mail!!

Del, got the R888's on lick 1st impressions on cold straight out of the box - WOW!!! The car feels so different and so planted. Oh me likey.

Seasider

12,728 posts

280 months

Friday 15th May 2009
quotequote all
Chimjunkie said:
Del, got the R888's on lick 1st impressions on cold straight out of the box - WOW!!! The car feels so different and so planted. Oh me likey.
Told you biggrin