Anyone SC'd a pre-serp?
Anyone SC'd a pre-serp?
Author
Discussion

gordonsalive

Original Poster:

446 posts

218 months

Monday 18th May 2009
quotequote all
I have a 430 pre-serp which goes just great but in the future I can see me wanting more power. Has anyone supercharged a pre-serp?

Thanks

John

GreenV8S

31,028 posts

315 months

Monday 18th May 2009
quotequote all
Mine has an Eaton 112 in the V, but the centrefugal blowers that are available now seem like an awful lot less work. You can get drive-through installations for the serpentine/intermediate engines, and I wouldn't have thought a pre-serp front end was significantly harder to do. You only need to physically mount the blower and provide a poly-V drive off the front pulley.

K4TRV

1,819 posts

283 months

Monday 18th May 2009
quotequote all
I understood you needed to check on pre-serp & that some could accept a longer woodruff key and the serp pulley/front end ??

Otherwise, you are into an extended crankshaft?? Plus all the extra work involved which would negate the current "easy" upgrade to a SC Power blower ??

Seems that each pre-serp needs to be checked for its suitability for the SC Power upgrade ??

Trev with a pre-serp !!

GreenV8S

31,028 posts

315 months

Monday 18th May 2009
quotequote all
K4TRV said:
I understood you needed to check on pre-serp & that some could accept a longer woodruff key and the serp pulley/front end ??
That would be the case if you were planning to convert your pre-serpentine engine to a serpentine front cover. But there are other approaches you can take. Mine was to use a compound pulley. There's just enough space between the front pulley and the damper to fit a 6-pk poly-V belt. As it happens that comes almost exactly in line with the standard poly-V belt on the serpentine setup.

Barkychoc

7,848 posts

235 months

Tuesday 19th May 2009
quotequote all
Sorry to hijack the thread but am I reading this right that you can fit a serp front to an engine with a pre serp small journal crank?
I have a late pre serp (1992 V8S) with what looks a long woodruff key slot in the crank.

jsr

1,155 posts

281 months

Tuesday 19th May 2009
quotequote all
I've got a pre-serp too and am very interested in this, but unfortunately i have no idea what any of the above means!!!!! smile

spend

12,581 posts

282 months

Tuesday 19th May 2009
quotequote all
Barkychoc said:
Sorry to hijack the thread but am I reading this right that you can fit a serp front to an engine with a pre serp small journal crank?
I have a late pre serp (1992 V8S) with what looks a long woodruff key slot in the crank.
I suppose its possible the 4.0 engines were based on the interim spec LR's with small journal serps, not seen any 4.3/5.0 pre-serps like that myself.

I've got access to both if you want comparative length/depth of the keyways? Just don't ask me to measure the keys I know they are somewhere but I'm not going to search for them tongue out ( sods law means I'll find them now! hehe )