chimp will not lock
chimp will not lock
Author
Discussion

johnny bravo

Original Poster:

54 posts

279 months

Friday 13th February 2004
quotequote all
Just bought a 4l chimp but i cant get it to lock sounds dopey but i have pushed the two buttons on the key fob / remote in loads of different sequences the car makes all sorts of bleeps and flashes but nothing.
i disconected the battery, might it need resetting or something, please help as i cant go anywhere in fear of her going for a walk

fatsteve

1,143 posts

306 months

Friday 13th February 2004
quotequote all
Does lock and then unlock?

johnny bravo

Original Poster:

54 posts

279 months

Friday 13th February 2004
quotequote all
Nothing, just bleeps and flashes

TT Tim

4,168 posts

276 months

Friday 13th February 2004
quotequote all
I assume that your're checking the driver's door. What about the passenger side? Does that lock? If not then I'd say it's a trigger from the alarm to the door lock solenoids, I'm not very 'up' on the working of the Chimaera locks but that would be my first thoughts.

HTH

Tim

johnny bravo

Original Poster:

54 posts

279 months

Friday 13th February 2004
quotequote all
Me nither, is there a sequance that the buttons should be pushed am i doing it rong or something. the remote is a small black box with two small rubber buttons and a small red light which lights up when a button is pushed, this seems be working ok

CraigAlsop

1,991 posts

297 months

Friday 13th February 2004
quotequote all
Check that both of the door light switch plungers are being fully depressed (they are in the sills & get pushed by strikers on the doors)
Does the interior light go off (after 10 seconds) when you shut the doors? (obviously you will have to put the light switch in the right position for this to happen)

Do you have the central locking switch on the central door knob? If so does it work when you press it?

hut49

3,544 posts

291 months

Friday 13th February 2004
quotequote all
johnny bravo said:
...."her" going for a walk

That'll be the problem then - it's a Trevor not a Treva

johnny bravo

Original Poster:

54 posts

279 months

Friday 13th February 2004
quotequote all
No the switch just makes a clicking noise when you press it, When you say is it "on", can it be turned on and off? Or is somethong broken

CraigAlsop

1,991 posts

297 months

Friday 13th February 2004
quotequote all
johnny bravo said:
No the switch just makes a clicking noise when you press it, When you say is it "on", can it be turned on and off? Or is somethang broken
No it can't be turned on & off, but the reason I was asking about the interior light is that the mechanism won't lock if it thinks that the door is open. This can happen if the door switches aren't pushed in correctly - what you then get is a solenoid *thunk* & then another *thunk* as it unlocks.

The mechanism can be seen behind the carpeted flap that is on the left of the passenger seat (held down by velcro, and tucked into the rubber door seal IIRC)
Might be worth opening this & seeing whether the mechanism just needs oiling...

yiw1393

23,018 posts

290 months

Friday 13th February 2004
quotequote all
My Chim has the interior light delay removed because it cases this sort of problem, I believe. Peninsula have removed the delay relay - top right on the fusebox and bridged it with a wire and 2 spade connectors so the light goes off as soon as the door closes.

That might be the problem, but I have a Meta alarm and it doesn't sound as though you have the same alarm though.

johnny bravo

Original Poster:

54 posts

279 months

Monday 15th March 2004
quotequote all
Spent most of saturday fiddeling with the locks. I am getting power at the plungers and the mechinism is oiled and moving freely, the interior light works and goes off after doors are closed, what else could it be?
I think it may be a trip to a specialist.

ribol

11,991 posts

287 months

Monday 15th March 2004
quotequote all
It sounds like the Foxguard type remote, two button next to each other, led in the corner, phillips screw on the back holding the two halves together?
Assuming it is then the two buttons both do the same job, the one on the left is silent, the one on the right does the same with beeps. Both will flash the indicators the same way.
Assuming we are talking about the same alarm then I would check there is a pulse going from the control unit to the central locking relay.

Ivan