Chim lower dash panel, light switch wiring - Please help!

[Rob Crutch]

I'm really hoping someone can help please?! I need to know which wires go onto the back of the (middle) light switch on the lower dash panel? When I took the panel off to do the dash swap I tried to note which colour wires went where as I removed each one, only to have a handful all come off at once and ruin my plans Now I'm having difficulty making the main beam work properly. If anyone has a wiring diagram for the lower dash panel that they can point me in the direction of, or send over I'd be really grateful!

Thanks,

Rob

[Derek Smith]

Rob,

On my '93 Chim - YOURS MAY BE DIFFERENT:

The two wires are red/white and blue/red.

The red/white is the power feed taken from the side light switch.

Hope this helps, but remember that TVRs' wiring varied.

Derek

[spend]

Main beam in isolation is not dependent on that switch, if either the main or dipped beam switch on & off with that switch, it is OK.

[TV8]

I have a picture of mine that I took when i had that panel out. I seem to have some spare wires and/or terminals but everything works fine, so left well alone. If you email me, I will send it over to you.

[Rob Crutch]

Thanks for the replies above

TV8 said:

I have a picture of mine that I took when i had that panel out. I seem to have some spare wires and/or terminals but everything works fine, so left well alone. If you email me, I will send it over to you.

Many thanks for this ^, I've sent you an email.

Rob

[Silhouvette]

Hi all, having similar problems with mine, only difference is I didn't take the wires out so have no clue to where they all go. Sorry I knows it's an old thread but would that picture still be available?