power steering pump
power steering pump
Author
Discussion

storm grey

Original Poster:

271 posts

213 months

Thursday 5th August 2010
quotequote all
hi there,

Can anybody help with my problem - I took the car to Torque RVT in Middlewich about 3 months ago because I had a problem with high speed handling. I was told that the problem could be with the power steering pump not having a valve in it to slow the rack down at high speed. He was trying to get a valve for me but can only get a pump with the valve already in place. As we are not really sure that this is the problem I can't justify the £100 spend for the pump.

Has anyone had this problem
Know where I can get the valve from
Replaced their valve
Or
Have any other suggestions

All help gratefully received.

Thanks

Steve

TJC46

2,199 posts

237 months

Thursday 5th August 2010
quotequote all
Sorry i cant be of help, but i dont understand this. The power steering rack is not governed by the speed of the pump, or is it? I thought the pump was to maintain a certain pressure of steering fluid within the rack any excess pressure was returned to the reservoir, or am i miles out here. Could anyone come along and explain exactly how the P.A.S. works CONCERNING PUMP, RACK, RESERVOIR ETC, and explain what R.V.T are talking about, because im totally baffled!

haircutmike

22,511 posts

235 months

Thursday 5th August 2010
quotequote all
TJC46 said:
Sorry i cant be of help, but i dont understand this. The power steering rack is not governed by the speed of the pump, or is it? I thought the pump was to maintain a certain pressure of steering fluid within the rack any excess pressure was returned to the reservoir, or am i miles out here. Could anyone come along and explain exactly how the P.A.S. works CONCERNING PUMP, RACK, RESERVOIR ETC, and explain what R.V.T are talking about, because im totally baffled!
Baffled X 2.

Surely in this case a pump is a pump or am I talking tosh.

I still think there may be nothing wrong if the car is correctly set up.

They do become light at speed, there's no doubt but quite safe(ish)!

Barkychoc

7,848 posts

235 months

Thursday 5th August 2010
quotequote all
It doesn't make any sense to me - as the pump is engine driven it can only be revs related - which if so every time you raise the revs the pump assistance would reduce which would be ridiculous - wouldn't it??

haircutmike

22,511 posts

235 months

Thursday 5th August 2010
quotequote all
Barkychoc said:
It doesn't make any sense to me - as the pump is engine driven it can only be revs related - which if so every time you raise the revs the pump assistance would reduce which would be ridiculous - wouldn't it??
yes

Also a decent pump is the best part of £200.00

TJC46

2,199 posts

237 months

Thursday 5th August 2010
quotequote all
storm grey said:
hi there,

Can anybody help with my problem - I took the car to Torque RVT in Middlewich about 3 months ago because I had a problem with high speed handling.

Steve
Could you give us all more details about your "high speed handling problems" Is it the front end going light? What speed can you first feel the problem? Someone on here may have at some time experienced similar and could possibly help. Is your front splitter still in place? Doesnt really help stability at speed but does stop the bonnet from trying to leave the car, and also helps cooling.

haircutmike

22,511 posts

235 months

Thursday 5th August 2010
quotequote all
I think we touched on this before, ride height.

These cars feel better at speed with a nose down attitude, a difference of 20mm imho works well, worth a try and it's free!

storm grey

Original Poster:

271 posts

213 months

Thursday 5th August 2010
quotequote all
hi there it is the front end feeling very light starts feeling scary at about 90 i have changed the dampers for pro tec ajustables.since coming back from rvt and ajusting the dampers i have managed 110 on a straight rd.and yes i have a splitter fitted.

haircutmike

22,511 posts

235 months

Thursday 5th August 2010
quotequote all
storm grey said:
hi there it is the front end feeling very light starts feeling scary at about 90 i have changed the dampers for pro tec ajustables.since coming back from rvt and ajusting the dampers i have managed 110 on a straight rd.and yes i have a splitter fitted.
Ride height front and rear?

Mr Haribo

318 posts

220 months

Thursday 5th August 2010
quotequote all
I have the same problem with my car so much so it puts me off it ! I have a 18mm drop front to back, 16" imolas on the front (which helped)and a splitter.
But I have heard the same that in the pump is a spring, as the engine revs harder the pressure builds and moves the spring like a pressure relife valve.
also if you take the pump apart you can cut the spring down so the steering is heavier ?

haircutmike

22,511 posts

235 months

Thursday 5th August 2010
quotequote all
scratchchin, We need some technical advice, Mr Spend, are you up?

storm grey

Original Poster:

271 posts

213 months

Thursday 5th August 2010
quotequote all
cant remember my ride hight something like 150 160 as recommended by you haircut mike

haircutmike

22,511 posts

235 months

Thursday 5th August 2010
quotequote all
Try dropping the front by 10mm, may well make the difference.

scruggs

419 posts

197 months

Thursday 5th August 2010
quotequote all
I think it should be 140 front and 160 rear. I am a newbie to this but (34 years of flying) the laws of aerodynamics would suggest that 10mm nose up at high speed could give front end lift and loose steering.

haircutmike

22,511 posts

235 months

Friday 6th August 2010
quotequote all
scruggs said:
I think it should be 140 front and 160 rear. I am a newbie to this but (34 years of flying) the laws of aerodynamics would suggest that 10mm nose up at high speed could give front end lift and loose steering.
This gives a 20mm nose down effect as opposed to the o/p's 10mm but I get your point.

Bluebottle

3,498 posts

271 months

Friday 6th August 2010
quotequote all
Sounds to me like your front and rear wheel alignment may be wrong and needs checking, in particular the toe-in which can have a dramatic effect on handling.

scruggs

419 posts

197 months

Friday 6th August 2010
quotequote all
haircutmike said:
scruggs said:
I think it should be 140 front and 160 rear. I am a newbie to this but (34 years of flying) the laws of aerodynamics would suggest that 10mm nose up at high speed could give front end lift and loose steering.
This gives a 20mm nose down effect as opposed to the o/p's 10mm but I get your point.
Doh!!

In my defence I did post late at night.

haircutmike

22,511 posts

235 months

Friday 6th August 2010
quotequote all
scruggs said:
haircutmike said:
scruggs said:
I think it should be 140 front and 160 rear. I am a newbie to this but (34 years of flying) the laws of aerodynamics would suggest that 10mm nose up at high speed could give front end lift and loose steering.
This gives a 20mm nose down effect as opposed to the o/p's 10mm but I get your point.
Doh!!

In my defence I did post late at night.
Occupational hazard nerd

Barkychoc

7,848 posts

235 months

Friday 6th August 2010
quotequote all
Thinking aloud could this pump spring thing talked about earlier be a pressure regulator? So the pressure remains roughly constant regardless of engine revs (thats the theory). If the regulator / valve whatever is faulty could it be building too much pressure as revs rise and so over assist the steering?

Total total guess.

storm grey

Original Poster:

271 posts

213 months

Friday 6th August 2010
quotequote all
all i can say about the pump is that ian in rvt worked on tvrs for 4 years for a dealer before starting his own buisness.he recond that they used to fit these valves to the pumps as like a recall.