does the spacer really makes a difference???
Discussion
I wouldn't necessarily expect more power from the spacer.
But it did make my car run much smoother in the 1800 - 2200 rpm bracket.
Obviously with the variability of TVR RV8 engines its not guaranteed to have the same effect on your car.
However if my experiences are anything to go by, & you have shunting issues, it could prove to be an excellent purchase.
You should also consider fitting the ACT plenum to AFM smooth bore pipe, this is the best VFM mod out there.
Add a K&N filter and you can expect a noticeable improvement in power delivery & driveability.
Definitely recommended.
But it did make my car run much smoother in the 1800 - 2200 rpm bracket.
Obviously with the variability of TVR RV8 engines its not guaranteed to have the same effect on your car.
However if my experiences are anything to go by, & you have shunting issues, it could prove to be an excellent purchase.
You should also consider fitting the ACT plenum to AFM smooth bore pipe, this is the best VFM mod out there.
Add a K&N filter and you can expect a noticeable improvement in power delivery & driveability.
Definitely recommended.
To my car it made a difference, the difference being it made it more tractable at lower speeds. I already had a smooth bore inlet, uprated injectors and a high flow air filter fitted. At the same time I also fitted the bell mouth trumpets from SC and shortened the trumpet length by around 15mm. It has made the car nicer to drive around town.
i fitted yesterday the K&N fliter and ACT elbow plus cut my trumpets around 18mm.call me crazy but the car is way better now.i am still waiting for sc power about my supercharger kit cause mine need to be modify cause aircon+pAS+intercooler.now i am looking at some mods to do.like carbon trumpets,spacer,insulating plate etc....any help on the what to do mods???
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


