how good is radtec???
Discussion
Had one fitted last Thursday (I think it is a Radtec), supplied and fitted with new hoses, came to a few quid over £1k.
Only done about 4 miles so far. Got to be better than what came off, half of the core/fins had gone behind the condenser, and you couldn't see it. The Rad was probably only working at 50% efficiency. Never overheated though.
Only done about 4 miles so far. Got to be better than what came off, half of the core/fins had gone behind the condenser, and you couldn't see it. The Rad was probably only working at 50% efficiency. Never overheated though.
anonymous said:
[redacted]
Why go for the Ally rad is it's never over heated.After 74k miles my original rad finally started to weep, so had it re-cored for less than £150 locally. Do at least 3.5k miles on the continent every year in temps upto 40 degrees and it's a modified engine set up running around 300 bhp . . And still don't get near to needing an ally rad.
I don't run a small number, I just keep the thing looked after like all the rest of you, so why would I need an ally rad, which has been known to crack (one owner here's on his 4th one!).
I'd be checking the thermostat, otter switch, fin condition and fans before spending £400 on a bling radiator. I can understand £1k with fitting time, pipes etc, but I just don't get why car's seem to 'need' them?
Mine was starting to leak badly, when I took it in they recommended the alloy rad. I could have gone for a recor, but with the hassle they would face getting it out (with the a/c condensor in the way) I didn't want to fit it then have it go in a year or so's time, and having to pay out for labour to have a replacement fitted.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




