body lift manifolds
body lift manifolds
Author
Discussion

floyd12345

Original Poster:

125 posts

205 months

Tuesday 10th August 2010
quotequote all
I am planing to do a full body off chassis refurb in the winter. looking at the engine, will the body lift with the manifolds still in place it looks very tight. but looks as though it just might go. the manifold bolts look a git to get at with the body on any advice from those who have done a body off gratefully excepted thanks.

Pink_Floyd

900 posts

252 months

Tuesday 10th August 2010
quotequote all
It won't go with the manifolds in place. I could not get the bolts undone, so took the engine out. I needed to send the chassis away for repair so the engine had to come off/out anyway.

Edited by Pink_Floyd on Tuesday 10th August 15:50

TVR Beaver

2,874 posts

211 months

Tuesday 10th August 2010
quotequote all
Take your time with the bolts.. you can get at them from the top if you have the right spanners.. otherwise you need to go underneath (you may have to take the starter off for the back one drivers side)... But give them plenty of releasing oil and hope you don't pull a head off... That said, if your taking the body off anyway, you could then remove any broken stubs and make sure the threads are okay for re-fit..

AREA

497 posts

256 months

Tuesday 10th August 2010
quotequote all
Yes, manifolds have to come off. It's just a tedious case (on the bottom ones) of turning a small bit at a time whilst flipping the spanner over and over to get the best leverage.

Drop me a PM and I'll send you the body off checklist I pulled together when doing mine.

AREA

497 posts

256 months

Tuesday 10th August 2010
quotequote all
Yes, manifolds have to come off. It's just a tedious case (on the bottom ones) of turning a small bit at a time whilst flipping the spanner over and over to get the best leverage.

Drop me a PM and I'll send you the body off checklist I pulled together when doing mine.