which is the best camshaft for a 400???
Discussion
Perceived wisdom is that a 218 is the one for blown applications. Like Spend, I'd have assumed there's no inherent reason why longer duration/overlaps can't be used above atmospheric pressure. The effects will be the same, just more so... think much of this might come from the fact that traditional positive displacement blowers are renowned for boosting low/mid-range torque (so it makes sense to build on an engine that naturally delivers this characteristic), but where the centrifugal types now commonly used are more top-end focused, I'd like to see the theorestic arguments for them not working with bigger cams 

long duration cams can be used to work on fi engines but the timing figures will be completely different to a na cam, the fact people use mild cams is purely of one reason they are easy to supply! and that isnt having a go at anybody, but a lets say going from a 4.5ltr engine to a 5.0 engine will require different cam timing figures to get the most from it, putting a supercharger on an engine is like turning a 5.0 na engine into a 7.0 engine, also a big reason for people going fi is to gain good power while still having good driveability and fuel consumption, a wild long duration cam wont let this happen, but a mild of the shelf cam isnt going to give you the optimum gains of a blower, to be frank a mild of the shelf cam will work fairly good from tickover to just over peak torque say 4500rpm on a rover, a long duration cam will only benefit from around peak torque upwards but loose a shed load of fuel consumption and torque low down. a proper blower cam should work from tickover all the way through to the rev limiter.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


