glitch .slip in the steering
Discussion
After changing everything from the track rod ends to having the steering rack reconditioned due to some free play in the steering i have managed to sort the problem out .It is now perfect and even drives in a straight line .The car was all over the road at high speeds ...What i did to cure the 3 year problem is .
Make sure both UJ`s are fully on the link bar, then i disconnected the top UJ away from the steering shaft and managed to push the shaft further in to the column by a good 1/2" .I then reconnected the top UJ and managed to get the UJ flush (touching the Fibreglass body)By tapping it with a hammer and piece of wood .This got rid of any slack between the UJ`s..I have now got no free play or glitch on the steering wheel and as made the steering feel more precise and it now drives nice and straight , The car does not pull to the left any more.
Im a happy man .

Make sure both UJ`s are fully on the link bar, then i disconnected the top UJ away from the steering shaft and managed to push the shaft further in to the column by a good 1/2" .I then reconnected the top UJ and managed to get the UJ flush (touching the Fibreglass body)By tapping it with a hammer and piece of wood .This got rid of any slack between the UJ`s..I have now got no free play or glitch on the steering wheel and as made the steering feel more precise and it now drives nice and straight , The car does not pull to the left any more.
Im a happy man .

Edited by SILICONE KID on Saturday 14th August 16:33
The shaft was just pushed up a little by hand ,no force.The steering column spline is fully on the top UJ .Please explain more! .Should the top UJ be flush with the body as there is about 15mm play up and down .If i pull mine down then i get that glitch and a noise from some where in the column .Push it up and its perfect .
Edited by SILICONE KID on Sunday 15th August 00:31
Edited by SILICONE KID on Sunday 15th August 22:47
Im knocking my head against the wall with the problem on my steering column.After changing everything the steering will only work perfect if i put the top Uj flush with the inner wing .This means all the splines or not in as far as they should be.If i fit the top UJ where it should be about 1" from the inner wing the car pulls to the left and feels wrong plus a glitch type slip at two points .I need to take it to the professionals.Im in Nottingham so where would be the best place to take it ..Cheers
Edited by SILICONE KID on Tuesday 17th August 21:02
SILICONE KID said:
Im knocking my head against the wall with the problem on my steering column.After changing everything the steering will only work perfect if i put the top Uj flush with the inner wing .This means all the splines or not in as far as they should be.If i fit the top UJ where it should be about 1" from the inner wing the car pulls to the left and feels wrong plus a glitch type slip at two points .I need to take it to the professionals.Im in Nottingham so where would be the best place to take it ..Cheers
Somewhere very close, preferably on a trailer !Edited by SILICONE KID on Tuesday 17th August 21:02
SILICONE KID said:
Ribol with a name like that your eather a Jew or a Cockny w
er
Interesting conclusion - no doubt arrived at using a similar level of intelligence you employ to work on your car. There may well be a link between that and the fact that you manage to fluk up everything you touch on you car.
erPS - If you make a career of making yourself look a fool on a public motoring forum you surely cannot be surprised when people treat you like one.
I asked for advice,the cause of the problem is due to the age of the car .If you can`t say anything constructive i suggest you keep away from this forum .Thats why every one is on here for advice ..not silly answers like that . You implied "take your car to a scrap yard" that is childish and below the belt .
SILICONE KID said:
I asked for advice,the cause of the problem is due to the age of the car.................
Most of the problems you have with you car are as a direct result that you are incapable of doing a job on a car without fluking it up. The age of your car isn't the problem, you are.You could stop all you car problems overnight, just get someone to collect all your tools tomorrow morning and take it to someone who knows something about cars.
Centre Gravity is a Porsche specialist, although I see from their website that there is mention of a TVR Chimaera. I would have thought that one of the TVR indies (if there is one close) would be a better solution, as they will have seen plenty more of these cars.
As for the comment about the OP taking his car to a breaker: out of order, and I would also have been upset if someone had suggested I do that with my own car. Comments like that are ok from good mates, otherwise, totally unhelpful, and IMHO, against the spirit of PH and the TVR community.
7.
As for the comment about the OP taking his car to a breaker: out of order, and I would also have been upset if someone had suggested I do that with my own car. Comments like that are ok from good mates, otherwise, totally unhelpful, and IMHO, against the spirit of PH and the TVR community.
7.
Edited by Number 7 on Wednesday 18th August 10:14
Edited by Number 7 on Wednesday 18th August 10:15
Number 7 said:
.....................IMHO, against the spirit of PH and the TVR community.
Whether the joke was funny or not (at least two posters thought so) is open for debate - but - if the OP chooses to respond to a JOKE (based entirely on his track record on here) with this:SILICONE KID said:
Ribol with a name like that your eather a Jew or a Cockny w
er
Then I make no apology for what comes next. More to the point nothing I have posted is inaccurate so for that reason alone I would not want to change it.
erNumber 7 said:
Centre Gravity is a Porsche specialist, although I see from their website that there is mention of a TVR Chimaera. I would have thought that one of the TVR indies (if there is one close) would be a better solution, as they will have seen plenty more of these cars.
As for the comment about the OP taking his car to a breaker: out of order, and I would also have been upset if someone had suggested I do that with my own car. Comments like that are ok from good mates, otherwise, totally unhelpful, and IMHO, against the spirit of PH and the TVR community.
7.
Nope, Chris does one thing and one thing alone, geometry. He also does race cars etc. My Griff was totally transformed after a visit there As for the comment about the OP taking his car to a breaker: out of order, and I would also have been upset if someone had suggested I do that with my own car. Comments like that are ok from good mates, otherwise, totally unhelpful, and IMHO, against the spirit of PH and the TVR community.
7.
Edited by Number 7 on Wednesday 18th August 10:14
Edited by Number 7 on Wednesday 18th August 10:15

Gassing Station | Chimaera | Top of Page | What's New | My Stuff





