Brakes
Author
Discussion

Simon BB

Original Poster:

284 posts

246 months

Monday 16th August 2010
quotequote all
Dear All,

I'm on hols next week and am set to take some time out to tinker with my new toy. I intend to replace discs and pads all round, not looking to upgrade so will be keeping it all as standard.

Just had a quick look online at main dealer prices for discs and pads......it there a cheaper / better place to source these from? £65 for a set of front pads...these are from a Ford Sierra right?

Or am I just being a tight northern git!

Cheers,

Simon

peaktorque

1,807 posts

242 months

Monday 16th August 2010
quotequote all
Any local motor factor should be able to help.

If your car is an earlier one with the Mickey Mouse 230mm disks then Fiesta sourced they are on the front and Sierra (with RDB) on the rear.

The latter/500 front disks are 260mm and are Sierra XR4i origin.

I believe that to be correct wink

Otherwise just take off the originals from the car and take them in as a match.

Simon says

19,466 posts

252 months

Monday 16th August 2010
quotequote all
240mm fronts are from the sierra 1.3/1.6 and only apply to you car if it's a pre 95 400,the rear pads are from any sierra fitted with ABS of 4x4 models or Granada's fitted with ABS or any V6 models wink

phillpot

17,524 posts

214 months

Monday 16th August 2010
quotequote all
Could do worse than speak to these guys (IMHO) www.brakesint.co.uk

But I'm sure there will be others along soon to say "only buy from known TVR specialists" etc. etc.

Teetertank

358 posts

218 months

Monday 16th August 2010
quotequote all
Hi Simon, I'm in the same position as you - need to do discs and pads all round. I'm reckoning these: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

They will do non-grooved/drilled etc if you want plain like the original, but there are others out there even cheaper if plain is what you are after.

I e-mailed them and they will do Mintex pads for £35 and that seems to be for both axles and all with free postage. Seems like decent price to me.

Or even cheaper £50 for front set including postage: http://cgi.ebay.co.uk/TVR-CHIMAERA-5-0-FRONT-BRAKE...

Edited by Teetertank on Monday 16th August 22:34

Simon BB

Original Poster:

284 posts

246 months

Tuesday 17th August 2010
quotequote all
Thanks guys, I'm not purposely trying to be a cheapskate but every little helps as they say!

I'll check out the sources you suggest, certainly seems more like the price ballpark I as expecting.

Thanks for all your help.

Cheers,

Simon

Teetertank

358 posts

218 months

Tuesday 17th August 2010
quotequote all
Does anyone know who makes the original pads for these cars?

And are Mintex standard pads any good, or would you recommend something more sporty?

Nosh

982 posts

198 months

Tuesday 17th August 2010
quotequote all
Simon BB said:
Thanks guys, I'm not purposely trying to be a cheapskate but every little helps as they say!

I'll check out the sources you suggest, certainly seems more like the price ballpark I as expecting.

Thanks for all your help.

Cheers,

Simon
Simon,

As a cheapskate Southerner, I wanted to replace all the brakes and discs (had a wobble / shake under braking and the discs looked minging...

Motorserve up the road did the standard discs and pads for my 400 (although the first set of front discs they gimmie were wrong)....in all about £130.

Replaced brake parts, checked droplinks, check all the bushes, track rod ends (will need changin soon), bled the brakes and took the first 100 miles REALLY steady....

Shakes / shudders are gone - brakes are bloody awesome and stop the car very nicely.......

All standard and all at Southern prices - heh wink

Nosh.

M@H

11,298 posts

303 months

Wednesday 18th August 2010
quotequote all
I put some EBC stuff (spiral groove discs and Greenstuff pads) on the front of my fist S and the difference was very noticable (in a good way) - only thing was that the pads prodiced a lot of dust so I was cleaning the wheels a lot. Not that expensive at all either.

I would agree though that buying the ford parts from your local motorfactor is the way to go - its not like TVR had them made specifically for them was it smile
Cheers,
Matt

laz11

517 posts

278 months

Wednesday 18th August 2010
quotequote all
Nosh said:
Simon BB said:
Thanks guys, I'm not purposely trying to be a cheapskate but every little helps as they say!

I'll check out the sources you suggest, certainly seems more like the price ballpark I as expecting.

Thanks for all your help.

Cheers,

Simon
Simon,

As a cheapskate Southerner, I wanted to replace all the brakes and discs (had a wobble / shake under braking and the discs looked minging...

Motorserve up the road did the standard discs and pads for my 400 (although the first set of front discs they gimmie were wrong)....in all about £130.

Replaced brake parts, checked droplinks, check all the bushes, track rod ends (will need changin soon), bled the brakes and took the first 100 miles REALLY steady....

Shakes / shudders are gone - brakes are bloody awesome and stop the car very nicely.......

All standard and all at Southern prices - heh wink

Nosh.
interesting what you say about taking it really steady with new brakes. i was told that with new brakes you still need to put some decent pressure on the pedal and give them some highish speed stops in a progressive manner...to ensure the pads actually "bed in". if you are too careful with the brakes they just dont get even use and you can actually shorten their life. not sure of the specific technical reasons but am sure someone will come along to enlighten

Nosh

982 posts

198 months

Wednesday 8th September 2010
quotequote all
laz11 said:
interesting what you say about taking it really steady with new brakes. i was told that with new brakes you still need to put some decent pressure on the pedal and give them some highish speed stops in a progressive manner...to ensure the pads actually "bed in". if you are too careful with the brakes they just dont get even use and you can actually shorten their life. not sure of the specific technical reasons but am sure someone will come along to enlighten
It was just advice I got - agressive use of new discs and pads can cause warping as well as being bloody dangerous....

It worked for me smile

Nosh

BliarOut

72,863 posts

270 months

Wednesday 8th September 2010
quotequote all
Nosh said:
laz11 said:
interesting what you say about taking it really steady with new brakes. i was told that with new brakes you still need to put some decent pressure on the pedal and give them some highish speed stops in a progressive manner...to ensure the pads actually "bed in". if you are too careful with the brakes they just dont get even use and you can actually shorten their life. not sure of the specific technical reasons but am sure someone will come along to enlighten
It was just advice I got - agressive use of new discs and pads can cause warping as well as being bloody dangerous....

It worked for me smile

Nosh
It is bad advice I'm afraid. The manufacturers of mine advised a series of 60MPH stops followed by a series of 'ahem' MPH stops followed by a period of driving

TEKNOPUG

20,502 posts

236 months

Thursday 9th September 2010
quotequote all
This is a very good read for all things "brakes"

http://www.stoptech.com/tech_info/wp_bedincontents...