Pre cat and emissions.
Discussion
I know this problem has ben posted up before but i thought a reminder might be worthwhile. Went for the MOT test and all was well but the tester had a very hard time getting it through the emmisions test, he eventually managed to get the readings needed briefly so gave me a pass but said something was deffo wrong with the fueling and needed looking at. The passenger side lambda didn't appear to be switching and when i removed it half of it had gone ! Long story short off with the manifold and found the precat had slipped and caught on the lambda probe and then kind of melted around it although approx half of it was still clear enogh to allow exhaust flow. So removed both precats and fitted new lambda took her back in to test the emissions and suprise suprise perfect.
Not really, my exhaust is sleeved so it sounds like armageddon already
. Real benefit is that they now can't cause me any more problems, ie destroyed lambda's, glowing red exhaust manifolds, blocked main cat etc. Don't know how it came loose, the one on the other side put up a hell of a fight to get it out, three hours of swearing, drilling and hammering !
. Real benefit is that they now can't cause me any more problems, ie destroyed lambda's, glowing red exhaust manifolds, blocked main cat etc. Don't know how it came loose, the one on the other side put up a hell of a fight to get it out, three hours of swearing, drilling and hammering !Gassing Station | Chimaera | Top of Page | What's New | My Stuff



