Clutch assembly/slave cylinder
Clutch assembly/slave cylinder
Author
Discussion

anonymous-user

Original Poster:

85 months

Friday 20th August 2010
quotequote all
Putting the engine back in tomorrow and just reassembled all the clutch components.
When I look at the slave cylinder the piston is forward on a spring, when I refit it I will have to compress the spring as I push the rod in and it is quite a strong spring. Surely this means the release bearing is constantly in contact with the ears on the pressure plate even with my foot off the clutch.
Is this right, am I missing something ?

Cant understand why the piston is pushed forward in this way even with no pressure in the system ?

David

V8NRG

854 posts

274 months

Friday 20th August 2010
quotequote all
If you undo the cap on the reservoir and push the piston back it will go fairly easily.

anonymous-user

Original Poster:

85 months

Friday 20th August 2010
quotequote all
It is the slave off the car, I am just surprised how much spring pressure there is holding the piston out. With the slave off the car.