ignition barrel stuck
ignition barrel stuck
Author
Discussion

jamescrooke

Original Poster:

2 posts

206 months

Saturday 21st August 2010
quotequote all
I need advice. I have replaced the ignition barrel in my 1995 Chimaera. The new one clicked beautifully into place but I the found that I cannot now turn the key to the 1st position.I had checked the unit prior to inserting it an it works fine so the trouble lies elsewhere.Whilst wiggling things i have also now locked the steering wheel.Now i cannot turn the wheel, turn on the ignition or even remove the barrel again as the key needs to be at position 1 in order to depress the locating lug!Please HELP.( Please don't point out that I should have left it to a professional, this has been clearly and emphatically stated already, It seemed so straight forward!!)banghead

big geoff

387 posts

231 months

Saturday 21st August 2010
quotequote all
try removing switch and then make shore the barrel is fuly locted in

jamescrooke

Original Poster:

2 posts

206 months

Sunday 22nd August 2010
quotequote all
Have tried to remove ignition switch from the opposite end to the barrel but it seems to be held by more than the grub screw and i'm not too keen on forcing it. Will have another go when it stops raining!Thank you