SILLY QUESTION
Discussion
The cylindrical device on the front of the O/S rocker cover is the flame trap, the small filter on the back of the N/S rocker cover is a breather.
The flame trap needs cleaning and the filter should be replaced periodically to ensure the positive crank case ventilation system is working correctly.
The flame trap needs cleaning and the filter should be replaced periodically to ensure the positive crank case ventilation system is working correctly.
The little filter is made up of two parts, a plastic case and a foam disc.
You just need to replace the foam disc and make sure the hole into the rocker cover is clear, the plastic case separates to expose the foam.
Find some suitable foam and cut yourself a new disc.
Simples!
Or you could fit a breather filter like this:

Just make sure there is enough space between the rocker cover & the mesh below the windscreen.
You just need to replace the foam disc and make sure the hole into the rocker cover is clear, the plastic case separates to expose the foam.
Find some suitable foam and cut yourself a new disc.
Simples!
Or you could fit a breather filter like this:
Just make sure there is enough space between the rocker cover & the mesh below the windscreen.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



