Discussion
SILICONE KID said:
Im a little confused regarding which lap top i need to install the fueling program.Will a modern 64bt with Windows 7 be ok.Iv`e been told i need a older laptop with 32bt and it must have a USB to serial connector .Advice please .
You would only need usb-serial connector if the lap top does not have a serial out. I dont see why a modern lap top can not do the same as a older one it is only running the software at the end of the day?will the program run on windows 7.Just been to the local Pc shop and he said i need something called a PCMCIA slot and insert a card ,or will the USB to serial adapter work ok .Im not going to touch anything except making some changes like the idle speed etc and keep my engines fueling program in the lap top.
Edited by SILICONE KID on Tuesday 24th August 13:39
Daz, you need an old lappie from ebay. I have a Dell D610 , it has a serial port. They go for ~£100 on ebay. Probably any old dell from 4 or 5 years ago will do, if you go for something unwanted with a small processor you'll pick something up for <£50 just check with the seller that is has a 9 pin serial port built in
Its the green port in this pic of a D610

Its the green port in this pic of a D610
Edited by bigdods on Tuesday 24th August 14:05
SILICONE KID said:
I wanted to buy a new laptop because i can`t get on my pC because of my son .So i can`t buy a new laptop and get it to work for my engine .If i managed to buy a new one with the serial port would it run on windows 7
Probably, but you won't find a new one with a serial port these days. SILICONE KID said:
I wanted to buy a new laptop because i can`t get on my pC because of my son .So i can`t buy a new laptop and get it to work for my engine .If i managed to buy a new one with the serial port would it run on windows 7
You need to say which software you are trying to run...If you're using something like a Megasquirt, then you will be fine with a new laptop. But because new laptops don't have the old style serial ports like were used yesteryear, then you just need a simple USB-RS232 (AKA serial plug, DB9) converter, like this:
http://cgi.ebay.co.uk/USB-RS232-Serial-9-Pin-DB9-C...
I must admit that in that link, the description doen't mention windows 7, but there are probably others that do. Some people report incompatibility with some of the USB converters, and I have had such trouble in the past, but you certainly don't need to spend the £30 or so that some people charge to guarantee it will work. A Chinese job can be fine if you get the right one, and you can pick them up for £3 including posage.
Meatball said:
thrownarod said:


here we go again,
Daz don't take this the wrong way, but if you are asking these sort of questions and other like it
on other forums i would leave mapping your car to someone who can before you f
kit up good and proper, AGAIN!!!Gassing Station | Chimaera | Top of Page | What's New | My Stuff








