Severe clonking HELP
Discussion
In need of some help here guys.
Just drove to work in my Chim 500 and as I was about half a mile away I went over a pot hole and this clonking started, fortunately I was only doing about 20mph. I had to crawl the rest of the way at about 5mph or the clonking would start and sounded like it was beating the underneath of the car. I am assuming it is a half shaft, but could it be something else that I could fix in the car park. I hate the thought of the car on the back of the AA low loader and for people to point and say 'look another broken down TVR' 55 miles from home and it is pissing it down.
Any suggestions most greatfuly received.
Barrie
Just drove to work in my Chim 500 and as I was about half a mile away I went over a pot hole and this clonking started, fortunately I was only doing about 20mph. I had to crawl the rest of the way at about 5mph or the clonking would start and sounded like it was beating the underneath of the car. I am assuming it is a half shaft, but could it be something else that I could fix in the car park. I hate the thought of the car on the back of the AA low loader and for people to point and say 'look another broken down TVR' 55 miles from home and it is pissing it down.
Any suggestions most greatfuly received.
Barrie
It could be many things.
When my rear diff mount became loose, it sounded awfull, really clonky, brought on by gently throttling on and off.
It would be unusual for a pot hole to bring something on but maybe a loose ARB, broken drop link etc.
Only advice is to "get under there" and thourghly check.
When my rear diff mount became loose, it sounded awfull, really clonky, brought on by gently throttling on and off.
It would be unusual for a pot hole to bring something on but maybe a loose ARB, broken drop link etc.
Only advice is to "get under there" and thourghly check.
Ok, just had the AA take a look, broken shock absorber. I can divert to racing green on the way home (on the low loader) to pick one up. I think I will get both sides as I am at it.
I am so happy that it was nothing more major.
And thank you for your quick replies and advice. This is what PH is all about.
Barrie
I am so happy that it was nothing more major.
And thank you for your quick replies and advice. This is what PH is all about.
Barrie
Edited by biper on Friday 27th August 10:19
biper said:
Ok, just had the AA take a look, broken shock absorber. I can divert to racing green on the way home (on the low loader) to pick one up. I think I will get both sides as I am at it.
I am so happy that it was nothing more major.
And thank you for your quick replies and advice. This is what PH is all about.
Barrie
Given the current topics, I am sure we are all interested in the make of the offender I am so happy that it was nothing more major.
And thank you for your quick replies and advice. This is what PH is all about.
Barrie
Edited by biper on Friday 27th August 10:19

Not very good at this, I think it is where the ram joins to the top, if that makes any sense. When I have taken them off I will try to be more precise.
When the car was jacked up on the broken side the wheel dropped a lot lower than the other side. But the S/A was still held in place, if you know what I mean. So it wasn't broken by the fixing point.
When the car was jacked up on the broken side the wheel dropped a lot lower than the other side. But the S/A was still held in place, if you know what I mean. So it wasn't broken by the fixing point.
Well got car home on the transporter, however when I got out of the truck I was horrified to see that the poor old Chim had sagged down on the side of the broken shocker. I had an 'UNINVITED GUEST'
Yep you guesses it, the journey home had on the back of the transporter had bumped along and thus the spring had gone throught the floor behind the passanger seat. A very neat break I have to say and will be fixed without trauma as it had not completely gone through, more like a half opened tin of beans and pushed back into position easily.
I decided not to go via RG as I could not justify £408 for two new shocks. I will take the oppotunity of upgrading all round.
The shocker itself had snapped at the ram leaving the top mounting in place simular to that of another post on here. They were I believe to be the origional Bilsteins.
Yep you guesses it, the journey home had on the back of the transporter had bumped along and thus the spring had gone throught the floor behind the passanger seat. A very neat break I have to say and will be fixed without trauma as it had not completely gone through, more like a half opened tin of beans and pushed back into position easily.
I decided not to go via RG as I could not justify £408 for two new shocks. I will take the oppotunity of upgrading all round.
The shocker itself had snapped at the ram leaving the top mounting in place simular to that of another post on here. They were I believe to be the origional Bilsteins.
Edited by biper on Saturday 28th August 12:04
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


