Relays
Author
Discussion

finestjammy

Original Poster:

741 posts

204 months

Friday 27th August 2010
quotequote all
I sorted this problem: http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Turned out to be the ignition relay and the fuse that controls the heater, instruments etc. Thanks for the advice.

I'm going to order a few spare relays so I don't get stranded should anything happen again. I assume the only 'critical' get you home relays are the Ignition, fuel and cooling fans? Also do I need to get these from Racing Green, Clevor Trevor, race tech etc, or will most parts suppliers supply suitable alternatives.

Thanks.

spend

12,581 posts

282 months

Friday 27th August 2010
quotequote all
Just buy a couple of std twin make/break relays... They will work in most of the std relay positions (the second / middle pin is not used in the normal fusebox) and at a pinch will work in the EFI to get you home (even though battery may discharge if left with them).

I just carry one of these & a 70A one in the cubby - they are fine for touring as well wink

finestjammy

Original Poster:

741 posts

204 months

Friday 27th August 2010
quotequote all
spend said:
Just buy a couple of std twin make/break relays... They will work in most of the std relay positions (the second / middle pin is not used in the normal fusebox) and at a pinch will work in the EFI to get you home (even though battery may discharge if left with them).

I just carry one of these & a 70A one in the cubby - they are fine for touring as well wink
Thanks Spend. Apart from the 70A ignition relay does it matter too much what amp rating the others are? Halfrauds seem to stock up to 40amp. It seems the 70A is a little more specialist. I'm going to replace all the fuses with new ones too just to make sure.

spend

12,581 posts

282 months

Friday 27th August 2010
quotequote all
Not really, generally 30A singles & 40A if twins IIRC, but the only heavy duty ones required are for the fans if you have still got a single relay / fuse for them.