Clutch bleeding
Clutch bleeding
Author
Discussion

anonymous-user

Original Poster:

85 months

Friday 27th August 2010
quotequote all
Wish the search facility would return howver.........

Engine back in can't get any pressure on the clutch. Master cylinder was new 2 years ago. Slave was cleaned up and looks OK. Clutch spurts a bit of fluid with nipple open, but doe not get much pressure when closed.
It is moving the clutch bearing but not much??

What do you think

Tried wife in car me shouting floor ! release ! etc and a one way bleed valve kit when she got pi**ed of and told me to get lost....

Thanks

S7Paul

2,103 posts

265 months

Friday 27th August 2010
quotequote all
I had a problem with my clutch recently (lots of pedal travel with no resistance). It wasn't immediately obvious what was at fault, i.e. master cylinder or slave cylinder. I wanted it fixed quickly, so bought both just in case. It turned out to be the master cylinder, so I have a working slave cylinder that you can borrow if you want to eliminate that from your enquiries. Your profile says you're in West Sussex, so you could be anything from 5 miles to 50 miles from where I live (Waterlooville). Send me an email if you're interested.

anonymous-user

Original Poster:

85 months

Friday 27th August 2010
quotequote all
Great thank you, 45 miles, Horsham.
I will have another go over the weekend and see where I get to.
Thanks for the offer.

S7Paul

2,103 posts

265 months

Friday 27th August 2010
quotequote all
No problem. If I were you I'd try bleeding it again before you do anything drastic. You never know, it may just be a bit of air still in the system.

Mark_S_24

405 posts

207 months

Friday 27th August 2010
quotequote all
Just got a Gunson Eezibleed from Halfrauds for my brakes (£19.99), maybe it'd be the thing for you, save the other half stomping off :-)

Mark