stumpy dizzy
stumpy dizzy
Author
Discussion

Meatball

Original Poster:

1,638 posts

241 months

Sunday 29th August 2010
quotequote all
Im in the process of fitting coilpacks, ive removed the dizzy and im about to chop it to retain the oil pump gear.
How do you seal the inner moving spindle ?
Is there a cap available to seal it or has anyone a clever got a good idea to get around this
Cheers

Jonny cobra

615 posts

243 months

Sunday 29th August 2010
quotequote all
Hi Meatball , Have a look on SA Power site they sell a plug that does the job ,

JC

Meatball

Original Poster:

1,638 posts

241 months

Sunday 29th August 2010
quotequote all
Jonny cobra said:
Hi Meatball , Have a look on SA Power site they sell a plug that does the job ,

JC
Hi, im pretty sure the plug S/c sell is to bung the hole left, im after something to seal the now open shaft of the chopped dizzy.
cheers

Jonny cobra

615 posts

243 months

Sunday 29th August 2010
quotequote all
Sorry m8 .


JC

Simon says

19,466 posts

252 months

Sunday 29th August 2010
quotequote all
Hi Ben wink it may be cheeky seeing as he sells the complete thing but he may be able to help http://cgi.ebay.co.uk/Megasquirt-Rover-V8-3-5-and-... failing that someone like Pupp or Spend might know different thumbup how you getting on with the spark & squirt then? biggrin

Edited by Simon says on Sunday 29th August 20:06

spend

12,581 posts

282 months

Sunday 29th August 2010
quotequote all
Get a bung & a short bit of hose, so you can use the bung directly if you find later that you have the cam retainer (or fit one)?

Meatball

Original Poster:

1,638 posts

241 months

Sunday 29th August 2010
quotequote all
Simon says said:
Hi Ben wink it may be cheeky seeing as he sells the complete thing but he may be able to help http://cgi.ebay.co.uk/Megasquirt-Rover-V8-3-5-and-... failing that someone like Pupp or Spend might know different thumbup how you getting on with the spark & squirt then? biggrin

Edited by Simon says on Sunday 29th August 20:06
Im getting there mate, just waiting for the pulley to be sent back from the balancer and Phils in the process of fitting the ignition drivers into my ecu.
Ive emailed the guy thumbup, failing that ill get a thread cut into the end and put a cap on it.

Meatball

Original Poster:

1,638 posts

241 months

Sunday 29th August 2010
quotequote all
spend said:
Get a bung & a short bit of hose, so you can use the bung directly if you find later that you have the cam retainer (or fit one)?
Thats a good idea thumbup
Cheers

Simon says

19,466 posts

252 months

Sunday 29th August 2010
quotequote all
Meatball said:
Simon says said:
Hi Ben wink it may be cheeky seeing as he sells the complete thing but he may be able to help http://cgi.ebay.co.uk/Megasquirt-Rover-V8-3-5-and-... failing that someone like Pupp or Spend might know different thumbup how you getting on with the spark & squirt then? biggrin

Edited by Simon says on Sunday 29th August 20:06
Im getting there mate, just waiting for the pulley to be sent back from the balancer and Phils in the process of fitting the ignition drivers into my ecu.
Ive emailed the guy thumbup, failing that ill get a thread cut into the end and put a cap on it.
Driving the coils directly then thumbup thought you would get the answers you need easy enough hehe