Timing
Author
Discussion

anonymous-user

Original Poster:

85 months

Monday 30th August 2010
quotequote all
All back together after re build and did first start up today for Cam break in.

Can someone let me know the static and all in timing before I run it up much more

Standard 4.0.

,many thanks

David

Chimpaholic

9,637 posts

210 months

Monday 30th August 2010
quotequote all
28 degrees advance at 4,000 rpm with the vac advance disconnected.

Edited by Chimpaholic on Tuesday 31st August 22:09

anonymous-user

Original Poster:

85 months

Monday 30th August 2010
quotequote all
great thank you

haircutmike

22,511 posts

235 months

Tuesday 31st August 2010
quotequote all
Chimpaholic said:
28 degrees advance at 4,000 rmp with the vac advance disconnected.
Is this a "standard" setting with a view to fine tuning with the right equipment?

Cider Andy

1,889 posts

256 months

Tuesday 31st August 2010
quotequote all
8° BTDC static.

Difficult to test statically with electronic ignition, but checked at idle with the vac line disconnected will be there or thereabouts.

anonymous-user

Original Poster:

85 months

Wednesday 1st September 2010
quotequote all
Now Set at 28 with a dial back light with vac disconnected.
At idle looks about 12 again vac disconnected.