99 4.0L Chim cutting out under deseleration
99 4.0L Chim cutting out under deseleration
Author
Discussion

Pauls Trevor

Original Poster:

27 posts

220 months

Wednesday 1st September 2010
quotequote all
Any help please

Chim cutting out under deceleration!

Took my yellow perel out for a good blat and all was fine. Then started up later that afternoon once choke backed off started cutting out!

This does not happen often but a few weeks ago it did it every time i took my foot off the accelerator.
Start it up again by lifting clutch while coasting and ok for about 2 mins and then cutting out again.
Got home and seems fine now.
What do i look for?

Thanks

miniman

30,238 posts

293 months

Wednesday 1st September 2010
quotequote all
Stepper motor, fuel pump relays, speedo transducer.

Garlick

40,601 posts

271 months

Wednesday 1st September 2010
quotequote all
Have a read through some of the comments following the update on my 4.0 (see homepage or GG forum) as I am having the same issues. Some good comments on there, but the above covers it all smile

TVR Stef

61 posts

197 months

Thursday 2nd September 2010
quotequote all
I had something similar with mine. But would always restart and idle fine until you used the throttle and released it again. In the end I fixed it by increasing the base idle a little (which was set correctly) and I've not had a problem since. Might be an area worth looking at...

Pauls Trevor

Original Poster:

27 posts

220 months

Thursday 2nd September 2010
quotequote all
Thanks
I will look at the weekend.

blueg33

47,014 posts

255 months

Wednesday 15th September 2010
quotequote all
I had exactly this problem. The guy that fitted the exhaust had left the AFM unplugged. So check that first.