IGNITION ADVANCE CURVE (Standard Dizzy)
IGNITION ADVANCE CURVE (Standard Dizzy)
Author
Discussion

Chimpaholic

Original Poster:

9,637 posts

210 months

Thursday 2nd September 2010
quotequote all
Hi can anyone out there provide me with an ignition advance graph for a Chim 4.0HC distributor?

Or just the figures would be fine and I will plot the curve myself.

Not sure if TVR power altered the ignition advance curves to match the different engine capacities & cams fitted, or if they just went for a one size fits all policy with the dizzy?

My Chim 4.0HC is fitted with the vernier adjustable 435 cam as per the 5 litre cars.

I have been told with the vac advance disconnected I should be getting:

  • 8 degrees of advance at an 800rpm idle (advance commences at 1000 rpm to show 10 degrees)
  • 28 degrees of advance at 4,000 rpm
I need to fill in the figures between these rpm's & above 4,000 rpm to plot my current advance figures against the correct curve.

This will help me get one step closer to discovering where my lost power has gone.

Thanks in advance (no pun intended) laugh

chimaera1855

334 posts

199 months

Thursday 2nd September 2010
quotequote all
we should open a club for the TVR i lost power too members.

chimaera1855

334 posts

199 months

Thursday 2nd September 2010
quotequote all
we should open a club for the TVR i lost power too members.

Simon says

19,466 posts

252 months

Thursday 2nd September 2010
quotequote all
Chimpaholic said:
Hi can anyone out there provide me with an ignition advance graph for a Chim 4.0HC distributor?

Or just the figures would be fine and I will plot the curve myself.

Not sure if TVR power altered the ignition advance curves to match the different engine capacities & cams fitted, or if they just went for a one size fits all policy with the dizzy?

My Chim 4.0HC is fitted with the vernier adjustable 435 cam as per the 5 litre cars.

I have been told with the vac advance disconnected I should be getting:

  • 8 degrees of advance at an 800rpm idle (advance commences at 1000 rpm to show 10 degrees)
  • 28 degrees of advance at 4,000 rpm
I need to fill in the figures between these rpm's & above 4,000 rpm to plot my current advance figures against the correct curve.

This will help me get one step closer to discovering where my lost power has gone.

Thanks in advance (no pun intended) laugh
I think you will find that's not where your power loss is at,i would go straight to checking the camshaft condition & cam timing making sure the vernier as not shifted wink not before checking the obvious things like filthy air filter,collapsing induction hose,full throttle,etc etc smile



Edited by Simon says on Thursday 2nd September 21:15

Chimpaholic

Original Poster:

9,637 posts

210 months

Thursday 2nd September 2010
quotequote all
Simon says said:
Chimpaholic said:
Hi can anyone out there provide me with an ignition advance graph for a Chim 4.0HC distributor?

Or just the figures would be fine and I will plot the curve myself.

Not sure if TVR power altered the ignition advance curves to match the different engine capacities & cams fitted, or if they just went for a one size fits all policy with the dizzy?

My Chim 4.0HC is fitted with the vernier adjustable 435 cam as per the 5 litre cars.

I have been told with the vac advance disconnected I should be getting:

  • 8 degrees of advance at an 800rpm idle (advance commences at 1000 rpm to show 10 degrees)
  • 28 degrees of advance at 4,000 rpm
I need to fill in the figures between these rpm's & above 4,000 rpm to plot my current advance figures against the correct curve.

This will help me get one step closer to discovering where my lost power has gone.

Thanks in advance (no pun intended) laugh
I think you will find that's not where your power loss is at,i would go straight to checking the camshaft condition & cam timing making sure the vernier as not shifted wink not before checking the obvious things like filthy air filter,collapsing induction hose,full throttle,etc etc smile



Edited by Simon says on Thursday 2nd September 21:15


Inclined to agree Simon but I still would like the figures.

For me its about adopting a systematic process of elimination.

Only after each element is confirmed as correct will I move on to the next.

Even if I find the cam timing has moved on the vernier sprocket early on I will still complete all the checks.

Often two or three issues can combine to make a problem worse.

Simon says

19,466 posts

252 months

Thursday 2nd September 2010
quotequote all
Chimpaholic said:
Simon says said:
Chimpaholic said:
Hi can anyone out there provide me with an ignition advance graph for a Chim 4.0HC distributor?

Or just the figures would be fine and I will plot the curve myself.

Not sure if TVR power altered the ignition advance curves to match the different engine capacities & cams fitted, or if they just went for a one size fits all policy with the dizzy?

My Chim 4.0HC is fitted with the vernier adjustable 435 cam as per the 5 litre cars.

I have been told with the vac advance disconnected I should be getting:

  • 8 degrees of advance at an 800rpm idle (advance commences at 1000 rpm to show 10 degrees)
  • 28 degrees of advance at 4,000 rpm
I need to fill in the figures between these rpm's & above 4,000 rpm to plot my current advance figures against the correct curve.

This will help me get one step closer to discovering where my lost power has gone.

Thanks in advance (no pun intended) laugh
I think you will find that's not where your power loss is at,i would go straight to checking the camshaft condition & cam timing making sure the vernier as not shifted wink not before checking the obvious things like filthy air filter,collapsing induction hose,full throttle,etc etc smile



Edited by Simon says on Thursday 2nd September 21:15


Inclined to agree Simon but I still would like the figures.

For me its about adopting a systematic process of elimination.

Only after each element is confirmed as correct will I move on to the next.

Even if I find the cam timing has moved on the vernier sprocket early on I will still complete all the checks.

Often two or three issues can combine to make a problem worse.
Exactly thumbup spot diagnosis and all that wink hence why I mentioned looking elsewhere.

v8 racing

2,064 posts

282 months

Friday 3rd September 2010
quotequote all
Hi Not too sure what you have had done/done to your car in the case of power loss?, The dizzy you have in fact all tiv rv8 dizzy's are just standard range rover items, if you are getting 28 deg at 3500-4000 rpm and an idle of somewhere between 10-14 with the vac advance dissconected your dizzy is about spot on, the vac advance wont make anymore power. I see you say tvr power fitted a 435 cam, I personally wouldnt change the advance curve from the factory setting for one of those, its only really when you get into wild cams you need to start messing with the dizzy.

Chimpaholic

Original Poster:

9,637 posts

210 months

Saturday 4th September 2010
quotequote all
v8 racing said:
Hi Not too sure what you have had done/done to your car in the case of power loss?, The dizzy you have in fact all tiv rv8 dizzy's are just standard range rover items, if you are getting 28 deg at 3500-4000 rpm and an idle of somewhere between 10-14 with the vac advance dissconected your dizzy is about spot on, the vac advance wont make anymore power. I see you say tvr power fitted a 435 cam, I personally wouldnt change the advance curve from the factory setting for one of those, its only really when you get into wild cams you need to start messing with the dizzy.
Thanks Rob,

In truth I very much doubt my 25% power loss is down to my ignition timing.

Actually I tried to contact you about my problems but no answer from my emails?

There is a good chance I need a cam and I understand you are the man to help.

Perhaps you could PM with your number so we so we can have a chat about my options?

Best regards, Dave.

SILICONE KID

14,997 posts

262 months

Saturday 4th September 2010
quotequote all
Would the Mallory distrubutor or even a 123 distributor work well on your car .I had a manual one fitted to my MGB with 16 settings.They have gone one step further,look at this.When having my megasquirt set up he did mention that one degree out made a loss of over 25bhp.



http://www.123ignition.nl/id/50.html


,

Simon says

19,466 posts

252 months

Saturday 4th September 2010
quotequote all
SILICONE KID said:
Would the Mallory distrubutor or even a 123 distributor work well on your car .I had a manual one fitted to my MGB with 16 settings.They have gone one step further,look at this.When having my megasquirt set up he did mention that one degree out made a loss of over 25bhp.



http://www.123ignition.nl/id/50.html


,
1 degree - 25hp loss rolleyes bks

Chimpaholic

Original Poster:

9,637 posts

210 months

Saturday 4th September 2010
quotequote all
Simon says said:
SILICONE KID said:
Would the Mallory distrubutor or even a 123 distributor work well on your car .I had a manual one fitted to my MGB with 16 settings.They have gone one step further,look at this.When having my megasquirt set up he did mention that one degree out made a loss of over 25bhp.



http://www.123ignition.nl/id/50.html


,
1 degree - 25hp loss rolleyes bks
No its true, I just found my timing was out by six degrees and after some adjustment I made an additional 150hp on the rollers jester

Or perhaps that's 150 ml of hp sauce on my bacon roll? lick

v8 racing

2,064 posts

282 months

Sunday 5th September 2010
quotequote all
Chimpaholic said:
v8 racing said:
Hi Not too sure what you have had done/done to your car in the case of power loss?, The dizzy you have in fact all tiv rv8 dizzy's are just standard range rover items, if you are getting 28 deg at 3500-4000 rpm and an idle of somewhere between 10-14 with the vac advance dissconected your dizzy is about spot on, the vac advance wont make anymore power. I see you say tvr power fitted a 435 cam, I personally wouldnt change the advance curve from the factory setting for one of those, its only really when you get into wild cams you need to start messing with the dizzy.
Thanks Rob,

In truth I very much doubt my 25% power loss is down to my ignition timing.

Actually I tried to contact you about my problems but no answer from my emails?

There is a good chance I need a cam and I understand you are the man to help.

Perhaps you could PM with your number so we so we can have a chat about my options?

Best regards, Dave.
Sorry dave i am getting quite a few emails a day at the moment my appoligies, but by all means call me on 07951208383 Regards Rob

Simon says

19,466 posts

252 months

Sunday 5th September 2010
quotequote all
Chimpaholic said:
Simon says said:
SILICONE KID said:
Would the Mallory distrubutor or even a 123 distributor work well on your car .I had a manual one fitted to my MGB with 16 settings.They have gone one step further,look at this.When having my megasquirt set up he did mention that one degree out made a loss of over 25bhp.



http://www.123ignition.nl/id/50.html


,
1 degree - 25hp loss rolleyes bks
No its true, I just found my timing was out by six degrees and after some adjustment I made an additional 150hp on the rollers jester

Or perhaps that's 150 ml of hp sauce on my bacon roll? lick
I am about to set my max advance to 60 degrees BTDC to see if I can out do the supercharged boyz hehe was hoping for around 500bhp bounce would go more but don't want to compromise reliability for power scratchchin