5AM Air Flow Meter
5AM Air Flow Meter
Author
Discussion

scotty_d

Original Poster:

6,795 posts

225 months

Sunday 12th September 2010
quotequote all
Just a quick question for any one in the know is there any difference between a standard Land rover 5AM and the one fitted in TVR’s. The reason i ask is after my little technical issue this morning i started changing some parts over for some spare LR bits i have and i left the LR 5AM Meter in and did a 200 mile trip and i am sure the car felt a bit more lively and was not poping and banging the same on over run, my car does run a little rich any way, now i am wondering could it have anything to do with the AFM? Has it stopped the car running as rich? And is there any way to test it to see if its working right with out going back on a RR?

Belchy

89 posts

204 months

Sunday 12th September 2010
quotequote all
Scotty,

afm test as per Mark Adams (via blitzracing) here.

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

hopes this helps

Belchy.

blitzracing

6,422 posts

251 months

Monday 13th September 2010
quotequote all
Ive not found any difference electronicaly, just the castings. They are getting pretty old by now, so the calibration may simply be different between the two as the hot wires can get contaminated and change the output for a given airflow, and the internal electronics can age.

scotty_d

Original Poster:

6,795 posts

225 months

Monday 13th September 2010
quotequote all
blitzracing said:
Ive not found any difference electronicaly, just the castings. They are getting pretty old by now, so the calibration may simply be different between the two as the hot wires can get contaminated and change the output for a given airflow, and the internal electronics can age.
Cheers thats what i needed to hear it may be the original one out the car is faulty but the RR unit has done over 150k lol what one do i trust lol

blitzracing

6,422 posts

251 months

Monday 13th September 2010
quotequote all
You can try the tests already mentioned, but they are not that precise, just a basic "is it working test". Other wise airflow is not an easy medium to calibrate against!