Exhaust leak
Exhaust leak
Author
Discussion

SILICONE KID

Original Poster:

14,997 posts

262 months

Sunday 12th September 2010
quotequote all
Just noticed i have a exhaust leak on the flexible bit ,what is the the best way to repair it,There are two small splits caused by speed ramps.my original exhaust did not have the flexy bit and gave me no problems,i did notice this type does sit slightly closer to the ground .

slideways

4,101 posts

252 months

Sunday 12th September 2010
quotequote all
High temperature Silicone
getmecoat
Well someone had to say it

SILICONE KID

Original Poster:

14,997 posts

262 months

Sunday 12th September 2010
quotequote all
Can you buy the flexible part and have it welded on,Don`t fancy getting a new exhaustfrownfrownfrown

slideways

4,101 posts

252 months

Sunday 12th September 2010
quotequote all
Have you done a google search?

SILICONE KID

Original Poster:

14,997 posts

262 months

Sunday 12th September 2010
quotequote all
Can`t find anything on Google,my old exhaust with no flexy bit gave me no trouble.What is the out side diameter.

Alexdaredevilz

5,697 posts

210 months

Sunday 12th September 2010
quotequote all
Here you go, im sure you can make a slot and clamp

https://www.jetex.co.uk/jetex/store/

SILICONE KID

Original Poster:

14,997 posts

262 months

Monday 13th September 2010
quotequote all
needs to be flexible ,solid is no good as it as to be a certain shape..bent to fit..

Teetertank

358 posts

218 months

Monday 13th September 2010
quotequote all
SILICONE KID said:
Can you buy the flexible part and have it welded on,Don`t fancy getting a new exhaustfrownfrownfrown
Yes - I did just that some months ago. I think its called flexi hose, it's not that easy to find on the web. Apparently you can get it replaced in stainless hose, but I spent a long time searching and never found any in the right size.

If you take it to an exhaust place they should be able to order in the bit if you can't source it.

In the interim, a baked bean can is the perfect size to sleeve it with some jubilee clips.


Alexdaredevilz

5,697 posts

210 months

Monday 13th September 2010
quotequote all

Teetertank

358 posts

218 months

Monday 13th September 2010
quotequote all
I tried exactly the type you posted the links for. Nice as they are, the braided outer section makes it too fat too fit - the bell housing won't allow it. Size is around 73mm

If anyone made it fit, would like to know- as I still have one of those sections sitting unused.

Alexdaredevilz

5,697 posts

210 months

Monday 13th September 2010
quotequote all
Teetertank said:
I tried exactly the type you posted the links for. Nice as they are, the braided outer section makes it too fat too fit - the bell housing won't allow it. Size is around 73mm

If anyone made it fit, would like to know- as I still have one of those sections sitting unused.
Ill have a look tomorrow a bit more

Tried the states?

SILICONE KID

Original Poster:

14,997 posts

262 months

Monday 13th September 2010
quotequote all
The early exhausts came solid.I had this type on the 4l,maybe that`s the way to go.

markreilly

795 posts

203 months

Monday 13th September 2010
quotequote all
Daren, the 5 litre had the flexible bit in the exhaust as standard.i quess more flexing was expected in the exhaust due to the greater power.JP exhausts in Macclesfield made the original exhaust so when mine went,they kindly made me a new piece which was welded back,very helpful people.
i made a small mod by welding a thin piece of stell over this section,welded at the front only which acts as a scrap barrier.
www.jpexhausts.co.uk 01625619916 there are two sizes so measure it before you ring them

Edited by markreilly on Monday 13th September 10:17

Teetertank

358 posts

218 months

Monday 13th September 2010
quotequote all
markreilly said:
i made a small mod by welding a thin piece of stell over this section,welded at the front only which acts as a scrap barrier.
Definitely a good idea. If you usually encounter lots of speed bumps then some extra protection should be useful. I noticed that the flexible section on mine lasted only one year. It’s the only non stainless part of the exhaust that can contact the ground, and certainly the weeakest part.

Flexible section is only found on 5.0 cars - doubt it would hurt much to replace with a solid piece though.

Colin RedGriff

2,541 posts

288 months

Monday 13th September 2010
quotequote all
Racing Green do a repair section for the flexible pipe

nuttyfruitbat

109 posts

212 months

Monday 13th September 2010
quotequote all

SILICONE KID

Original Poster:

14,997 posts

262 months

Monday 13th September 2010
quotequote all
Does any one know the diameter.

markreilly

795 posts

203 months

Monday 13th September 2010
quotequote all
SILICONE KID said:
Does any one know the diameter.
As i said there are two diameters !

SILICONE KID

Original Poster:

14,997 posts

262 months

Monday 13th September 2010
quotequote all
What are the two diameters.I could purchase both and send one back !

markreilly

795 posts

203 months

Monday 13th September 2010
quotequote all
SILICONE KID said:
What are the two diameters.I could purchase both and send one back !
Talk to JP,if memory serves me correct i managed to order the wrong one but the guy still managed to weld it on