Induction mods
Discussion
Expect this has been discussed before, but search still down.
Has anyone shortened the air intake tract and relocated the air filter inside the engine bay?
I know the inlet air temp would be hotter due to engine/manifolds etc if filter inside engine bay, but would this be offset by the reduced resistance?
Seems the intake diameters are:
73mm for the hose between air filter and air flow meter.
80mm from airflow meter to manifold - reducing to:
76mm inlet for manifold
My plan it to remove the AFM for an ECU mod, and am questioning if it's worth installing an 80mm airfilter on the end of an ACT elbow linking the filter to the inlet manifold. This way the restriction from about 2m of reduced diameter (73mm) hose are removed.
I expect cruising would be improved, but idling in traffic degraded...?
Has anyone shortened the air intake tract and relocated the air filter inside the engine bay?
I know the inlet air temp would be hotter due to engine/manifolds etc if filter inside engine bay, but would this be offset by the reduced resistance?
Seems the intake diameters are:
73mm for the hose between air filter and air flow meter.
80mm from airflow meter to manifold - reducing to:
76mm inlet for manifold
My plan it to remove the AFM for an ECU mod, and am questioning if it's worth installing an 80mm airfilter on the end of an ACT elbow linking the filter to the inlet manifold. This way the restriction from about 2m of reduced diameter (73mm) hose are removed.
I expect cruising would be improved, but idling in traffic degraded...?
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


