Switched 12v feed for radio
Discussion
miniman said:
Is my Chim an oddity in that the radio is hooked up only to a permanent 12v (i.e. it doesn't turn off with the ignition)? Or is there a switched feed in there somewhere?
Standard is usually with the ignition. I had all mine changed by the dealer to permanent on.(so I could listen when 'er indoors is shopping
)you can mod the key switch so it comes on at 1 click... for some reason TVR cut this part off but it can be reversed... you need to mod the base moulding a tad also... there is a post on here i think of the exact details of how to do it... 

Edited by TVR Beaver on Monday 13th September 20:19
Assuming the wiring is the same as my 96 Griff 500 then there is a switched feed for the radio. My radio had a permanent feed but I converted it to switched when I changed it recently.
From memory I think it was green with a red tracer. Easy enough to check with a multi meter. There aren't that many wires to the radio once you've eliminated the aerial and the speaker wires.
From memory I think it was green with a red tracer. Easy enough to check with a multi meter. There aren't that many wires to the radio once you've eliminated the aerial and the speaker wires.
Any good for you? http://www.chimaerapages.com/resources_ignitionaux...
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



