Toyo Proxes - what pressure?
Toyo Proxes - what pressure?
Author
Discussion

The Aardvark

Original Poster:

229 posts

224 months

Saturday 18th September 2010
quotequote all
Hi All
Have just changed 2 Bridgestones on the front of the Chim for 2 Toyos in 205/55/15 size (1999 4.0l).
I ran the old tyres at approx 22 psi as per the manual, but have read a couple of threads where people indicated that the Toyo was a softer tyre and perhaps should be inflated a bit higher.
The garage that fitted them inflated them to 32 psi, which I've reduced to 24 psi but wondered what the general consensus was?
Dunlop SP9000's on the rear at present which are also at 24 psi.
Appreciate any views.
Cheers.

Alexdaredevilz

5,697 posts

210 months

Saturday 18th September 2010
quotequote all
I run 26 rear 24 front

No problems as yet

m4ckg

625 posts

222 months

Saturday 18th September 2010
quotequote all
I've set mine at 25 and 27 on 17"s and feels good to me

Chimaera001

109 posts

274 months

Sunday 19th September 2010
quotequote all
Alexdaredevilz said:
I run 26 rear 24 front

No problems as yet
+1 yes

15'' CF1 on the front, 16'' T1-R's on the rear (1995 4.0l Chim)

taylormj4

1,635 posts

297 months

Tuesday 21st September 2010
quotequote all
I have Toyos front and back and run the recommended pressures 22 & 24 (rear). Seems fine.
The tyre place also put my pressures up at around 35 psi all round. The car was lethal to drive !

Have been wondering if Toyo have changed the tyre compound or structure as this is the second set that I have had and they seem a lot harder than the first batch I had: can feel bumps in the road a lot more.

Matt

The Aardvark

Original Poster:

229 posts

224 months

Wednesday 22nd September 2010
quotequote all
Thanks for all the replies. Have left the fronts at 24 psi and all seems OK - just aware that the sidewall feels much softer than the old Bridgestones, and that the recommended 22 psi seems particularly low!!