Annoying noises - Vol.2
Discussion
Right, im determinged to figure out what some of the annoying noises are on my chim, so all sugestions will be very much appreciated....
Noise 1:
- a squeek from the brakes(?), appears to be every rotation of the front wheel, changes note under light/medium braking, and dissapears under hevy braking.
Noise 2:
- a "jiggling" sort of sound, like a washer rattling about, most noticeable when either taking off (my clutch had had it so judders, have a new one ready to go), or when i turn the engine off, as the engine has a last little shake. cold this be a loose engine mount?
Noise 3:
- more worrying, the engine is sounding very tappy, or that might just be me... but there is a distinct knocking sound, seems to go away when hot. oil pressure is ok, plenty of oil, isnt using oil / water more than normal, and no smoke at all from exhausts...
Now something i noticed yesturday was that when under the bonnet with the sngine running, i could smell a bit of exhaust fumes..... but cant find any manifold leaks.!?
Noise 1:
- a squeek from the brakes(?), appears to be every rotation of the front wheel, changes note under light/medium braking, and dissapears under hevy braking.
Noise 2:
- a "jiggling" sort of sound, like a washer rattling about, most noticeable when either taking off (my clutch had had it so judders, have a new one ready to go), or when i turn the engine off, as the engine has a last little shake. cold this be a loose engine mount?
Noise 3:
- more worrying, the engine is sounding very tappy, or that might just be me... but there is a distinct knocking sound, seems to go away when hot. oil pressure is ok, plenty of oil, isnt using oil / water more than normal, and no smoke at all from exhausts...
Now something i noticed yesturday was that when under the bonnet with the sngine running, i could smell a bit of exhaust fumes..... but cant find any manifold leaks.!?
Can't help with either of the first 2 but could suggest that you check the Y piece for any cracks along the welds. Have spent a few years cursing that even after manifold gasket replacements I still ahd a very distinct exhaust blow noise. Finally tracked it down to a crack along the weld in the Y piece.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


