Prostart
Author
Discussion

rabowman

Original Poster:

284 posts

219 months

Saturday 25th September 2010
quotequote all
Fitted a Prostart button today, and although I have fitted 4 others to different cars, I have got a prob. The P/strt light is meant to go out when you start the car(it couples into the ign light) According to the wiring diagram in the Chim Bible this is picked up from a male spade terminal at the back of the alternator. Not on my car!!!!
Does anyone have an idea as to where it might be?
Tks
Rob

rabowman

Original Poster:

284 posts

219 months

Saturday 2nd October 2010
quotequote all
HELP !!!!

darkcat

2,354 posts

201 months

Saturday 2nd October 2010
quotequote all
does it start and run otherwise?

rabowman

Original Poster:

284 posts

219 months

Saturday 2nd October 2010
quotequote all
Yes, runs superbly and starts on the P/S button. Only prob is that the green light on button that should be joined to ign light does not go off. If you disconnect the TVR wire from the back of the alternator that the bible shows as going to ign warning light this also makes no difference and ign light still goes out when you start the car.

j&ms

121 posts

270 months

Tuesday 5th October 2010
quotequote all
Watching with interest, how are you getting on?

Still the same or found a solution?
Please post either way.
Regards

rabowman

Original Poster:

284 posts

219 months

Wednesday 6th October 2010
quotequote all
Thanks for your interest. Getting nowhere with this, button works ok but light will not go out when engine starts. Someone (but I think they are hiding!!!) must know where the ign charge is picked up from.
Starting the car with a Pro Start is a serious Feel Good Factor.
Rob