body lift started need wishbone
body lift started need wishbone
Author
Discussion

floyd12345

Original Poster:

125 posts

205 months

Saturday 25th September 2010
quotequote all
I have just started a body off chassis refurb and my my drivers side top wishbone has had it rusted through, all the others seem good. where is the best place to source one quick as i have got the chassis booked in to be sand blasted and powder coated next week along with the wishbones. dose any one know who was selling the after market round ones i read about on here a while back these were cheaper than the standard ones thanks in advance.[

Edited by floyd12345 on Saturday 25th September 18:55

floyd12345

Original Poster:

125 posts

205 months

Saturday 25th September 2010
quotequote all
p



Edited by floyd12345 on Saturday 25th September 18:55

floyd12345

Original Poster:

125 posts

205 months

Saturday 25th September 2010
quotequote all

floyd12345

Original Poster:

125 posts

205 months

Saturday 25th September 2010
quotequote all

carsy

3,019 posts

196 months

Saturday 25th September 2010
quotequote all
I am also just about to lift the body off my Griff for a complete overhaul. I got new wishbones from sc power, they look good quality and nicely powdercoated. The round ones you are after are from Grantura engineering / Readman Racing Poulton Industrial estate Lancashire. I havent seen any of these so cant comment.

floyd12345

Original Poster:

125 posts

205 months

Saturday 25th September 2010
quotequote all
thank you

SILICONE KID

14,997 posts

262 months

Saturday 25th September 2010
quotequote all
I have the Readman Racing uprated tubular wishbones ,cheaper and better than standard wishbonescool

SILICONE KID

14,997 posts

262 months

Saturday 25th September 2010
quotequote all
If your going to do it do it rightlaugh

markreilly

795 posts

203 months

Sunday 26th September 2010
quotequote all
I'd recommend SC-Power wishbones

finestjammy

741 posts

204 months

Monday 27th September 2010
quotequote all
SILICONE KID said:
I have the Readman Racing uprated tubular wishbones ,cheaper and better than standard wishbonescool
Remember that if 'uprated' = stronger wishbones the risk of chassis damage is increased if you hit something. Wishbones are a bit like the human collar bone i.e. the collar bone will break before your neck does!

markreilly

795 posts

203 months

Monday 27th September 2010
quotequote all
finestjammy said:
SILICONE KID said:
I have the Readman Racing uprated tubular wishbones ,cheaper and better than standard wishbonescool
Remember that if 'uprated' = stronger wishbones the risk of chassis damage is increased if you hit something. Wishbones are a bit like the human collar bone i.e. the collar bone will break before your neck does!
Hence my recommendation of SC- Powers Bones !

CHGRIFF

326 posts

283 months

Monday 27th September 2010
quotequote all
Ah a doctor in the house! Your analogy is correct, wishbones need to be a safe weak link. With a car worth say £12K and minor accidents coming to around £7K you want the damage localised. If the impact loads due to stronger wishbones are transfered to the chassis and result with the slightest distortion I'm afraid the car would be written off. It seems today that most TVR Griffith and Chimaeras are now written off due to minor impacts. Think I could name 5 this year. Most wishbones are original and have lasted 10 years, the SC power ones being uprated to accept higher suspension loads without compromising the design. I would stick with the proven parts.

markreilly

795 posts

203 months

Wednesday 29th September 2010
quotequote all
CHGRIFF said:
Ah a doctor in the house! Your analogy is correct, wishbones need to be a safe weak link. With a car worth say £12K and minor accidents coming to around £7K you want the damage localised. If the impact loads due to stronger wishbones are transfered to the chassis and result with the slightest distortion I'm afraid the car would be written off. It seems today that most TVR Griffith and Chimaeras are now written off due to minor impacts. Think I could name 5 this year. Most wishbones are original and have lasted 10 years, the SC power ones being uprated to accept higher suspension loads without compromising the design. I would stick with the proven parts.
I would recommend SC-Powers wishbones for a number of reasons,they were signed off and made for TVR.they are standard in every way except in quality of metal used (better) than the earlier TVR parts and the only modification from standard is the the front lower bone which was strenghtened at the hub end to take higher suspensions loads with high rate springs.they still fold in an accident exactly the same way.talk to David,he after all got to check this out in reality when somebody crashed into him last winter.