How much to replace a cam?
Discussion
Hi
I am looking to get a Chim very shortly but the car in question has a worn out cam (rattly when warmed up, lacking any real grunt). How much as a ball park figure do you think it will cost to swap out. RPi Engineering tell me it's approx £370.00 for the kit (Piper). I have thought about doing it myself and would I be right in thinking I just need a Range Rover (Haynes) manual to find out how?
Any tips/hints gratefully received......
I am looking to get a Chim very shortly but the car in question has a worn out cam (rattly when warmed up, lacking any real grunt). How much as a ball park figure do you think it will cost to swap out. RPi Engineering tell me it's approx £370.00 for the kit (Piper). I have thought about doing it myself and would I be right in thinking I just need a Range Rover (Haynes) manual to find out how?
Any tips/hints gratefully received......
I bought mine about a month ago and soon found out it needed a new cam.
Originally quoted £2500
, but thanks to this forum I was quickly brought back into the real world.
Just had mine done and am picking it up tomorrow - Cost just under £1000 which all thing considered I felt was reasonable - Considered doing it myself but simply didnt have the time right now.
Be interested to know how you get on.
Originally quoted £2500
, but thanks to this forum I was quickly brought back into the real world.Just had mine done and am picking it up tomorrow - Cost just under £1000 which all thing considered I felt was reasonable - Considered doing it myself but simply didnt have the time right now.
Be interested to know how you get on.
SILICONE KID said:
Piper is a bit old hat,Things have moved on so i would go for the MC1 or stealth..
I would have a word with V8D or TVR power.
Do Piper not make both of these, they certainly do the stealth. Things have moved on though, I was charged 10 hrs labour to do my cam, now apparently it takes only 6hrs I would have a word with V8D or TVR power.

Yep, Piper produce many of the proprietary cams offered by different tuners. You specify the data for it (base circle dia, lift, duration, timing, no of cyls, firing order, quietening ramp details, lobe width, follower type/material, required hardness and metallurgy, spring pressure, bearing config, and plenty of other variables; they grind it for you and you can then sell it as a 'Daz old hat special' or whatever
CHIMAERA 1885 Call V8 Developments or TVR power if you have decided to fit A super charger.They will give you advice.You could get the plug and play Megasquirt(no wireing) and add the trigger wheel wireing etc for wasted spark at a later date..It will only need to go on the rollers for a re map.You are very limited with what you have 14CUX.I changed from a 285 cam to a 217 when i had the Eaton 45 charger on my MGB.Some one will explain why!Think its something to do with cam lift duration and overlap.A more mild cam works better with the super charger and a lower compression engine.Engine
Edited by SILICONE KID on Saturday 2nd October 15:49
Edited by SILICONE KID on Saturday 2nd October 15:52
Gassing Station | Chimaera | Top of Page | What's New | My Stuff








