17" wheel tyre combinations on Chimaera
17" wheel tyre combinations on Chimaera
Author
Discussion

cookie450

Original Poster:

183 posts

208 months

Sunday 3rd October 2010
quotequote all
What 17" wheel / tyre options are people running on their Chims ?... Daz has already quoted

Front Wheels 4x108 (J 7 or 7.5) (ET 25 or close) )Tyre 215/40/17

Rear wheels 4x108 (8J minimum) (ET 33 or close) Tyre 245/40/17

I'm would like to go for 225 allround and 7.5 wide rims with 25 offset (currently 245/45 7.5 x 16 35ET on rear)

Anyone running similar options ? how tight are the fronts with 7.5" wheels ?

Thanks

JR

14,332 posts

289 months

Sunday 3rd October 2010
quotequote all
What most peole forget is that their own requirements affect the best answer for them. There are a great manu wheel and tyre combinations that are best depending upon owner/driver demands. In your case you appear to want looks and a cheap cost (large wheels, same size all round.) To achieve this I'd say that you'd be better off not putting on full lock, buying a pair of 5mm spacers and ET30.

scotty_d

6,795 posts

225 months

Monday 4th October 2010
quotequote all
I am on 17" all round with power steering i use front 215/40/17
rear 225/45/17


Works for me i run good year eagle f1's gs-d3, great tyres.

Pvapour

8,981 posts

284 months

Monday 4th October 2010
quotequote all
not a fan of equal size wheels front and rear, just looks a little wrong imo.

I went with:

18" 7.5J rear et33 (245/35/18)
17" 7J front et, not sure but added 1" hub centric spacers (215/40/17)

Good year eagle F1s here to (always use these when I can) would go 225s on the rear next time though.



cookie450

Original Poster:

183 posts

208 months

Monday 4th October 2010
quotequote all
JR said:
What most peole forget is that their own requirements affect the best answer for them. There are a great manu wheel and tyre combinations that are best depending upon owner/driver demands. In your case you appear to want looks and a cheap cost (large wheels, same size all round.) To achieve this I'd say that you'd be better off not putting on full lock, buying a pair of 5mm spacers and ET30.
Cost isn't a driving factor, and I'd rather not use spacers when I can buy the correct wheels. However, what I can't do is try the countless variations that people may have used on here, so I'm really just trying to get some objective feedback on what works and what doesn't. I'm less worried about the back as I know 225/45 will fit on a standard 7.5 33ET wheel but am keen to discover who is running 17x7.5 wheels up front using std 25mm offset , and what tyres they are running.

Are ET30 wheels cheaper than others relatively speaking ?

JR

14,332 posts

289 months

Monday 4th October 2010
quotequote all
Hi. ET 33 and 35 were both fitted to the rear of the Grif/Chim chassis depending on which wheels that you have. ET30 is a halfway house based on my guessing of the requirement to have the same offset all round to minimise cost. There is nothing especially cheap about ET30 AFAIK. Now that you have said that cost is not an issue you're better off with different offsets f&r. Your main problem with 17" wheels is potential rubbing on the bodywork. This is hard to assess on the internet because the bodies, spring lenths and rates, damper settings, suspension bushes etc. vary. It may help to know that TVR designed the chassis with 215f&225r tyres. With this in mind this is a safe bet:

scotty_d said:
I am on 17" all round with power steering. I use front 215/40/17 and rear 225/45/17.

Works for me I run goodyear eagle f1's gs-d3, great tyres.

dumbfunk

1,727 posts

315 months

Monday 4th October 2010
quotequote all
On my Griff500 I went for 17" Team Dynamics Pro Race 1.2s in Anthracite all round.

The fronts are 17" x 7" with 215/40/17 (ET25) and the rears 17" x 8" with 245/40/17 (ET35). No spacers, perfect offset, near identical rolling radius, huge weight saving.

I have had both 17s and 18s on a BMW and personally found no discernible improvement in handling but a huge decrease in ride quality so felt this did not justify the additional expense.

Another company to look at is Compomotive - they have some designs that would almost look original equipment on a Griff/Chim.



df


CHGRIFF

326 posts

283 months

Monday 4th October 2010
quotequote all
Problem with TVR's is the larger body fit tolerance, so what works for one car may not work on another. 1/2" deviation either side of vehicle centreline can be expected. Check you own car and see whether the wheel profile relative to the wheelarch eybrow has a deviation, if so you need to be more cautious if going for larger wheels. On my Griff I fitted Team Dynamics 17 x 9 front and rear because I wanted maximum track for circuit use with 235 tyres on the front and 255 tyres on the rear. It is a tight fit with the body work being adjusted including the removal of the corner battery tray body recess Generally if increasing front rim width the rim will touch the wishbone when on full lock. For normal road use I would go for 17 x 8 on the rear and 16 x 7 or 8 on the front, these work well and keeps the balanced look of the original wheels with 1" differential. You must stay close to original offsets, but if you do not have power steering and find the steering a little heavy, the front offset could be increased slightly to reduce the steering loads. I used 28mm offset on the front with these huge tyres as my car does not have PAS, the resulting steering feel is perfect and the loading acceptable when pulling away from a parking space.

cookie450

Original Poster:

183 posts

208 months

Monday 4th October 2010
quotequote all
JR said:
Hi. ET 33 and 35 were both fitted to the rear of the Grif/Chim chassis depending on which wheels that you have. ET30 is a halfway house based on my guessing of the requirement to have the same offset all round to minimise cost. There is nothing especially cheap about ET30 AFAIK. Now that you have said that cost is not an issue you're better off with different offsets f&r. Your main problem with 17" wheels is potential rubbing on the bodywork. This is hard to assess on the internet because the bodies, spring lenths and rates, damper settings, suspension bushes etc. vary. It may help to know that TVR designed the chassis with 215f&225r tyres. With this in mind this is a safe bet:

scotty_d said:
I am on 17" all round with power steering. I use front 215/40/17 and rear 225/45/17.

Works for me I run goodyear eagle f1's gs-d3, great tyres.
Thanks for all the feedback - probably going for 215/40 and 225/45 on 17" with 7xET25 and 7.5xET35 as per original spec then. Just need to get saving now !!!

JR

14,332 posts

289 months

Monday 4th October 2010
quotequote all
Christmas present?

scotty_d

6,795 posts

225 months

Tuesday 5th October 2010
quotequote all
That why I run that size on mine kept it as close to the standard set up as I could and my Speedo reads bang on to GPS.

In all truth I would run 16" all round if I were you the low profile tyre is not to good on our pot hole ridden roads the 17" are fine on good roads but the roads are not very good anymore and that bigger profile on a 16” rim will give you a better and quicker drive on the road.