Renew of petrol pipes
Discussion
Hi fellow piston heads,
Decided to change the fuel pipes on my 97 Chim as the ones in the engine bay are cracked
...
if these are worn then the others would benefit from updating plus I thought to flush the tank at the same time, what a PITA to get the tank out – observation - the sealant company must have hit hard times when TVR packed up.
I have a 4X2 inch horizontal hole in the boot to get a 20mm pipe through and why the hell is that little swan neck not be part of the tank fixing. If the 4X2 hole if made vertical the swan neck would fit and then you would have only one joint, ohh the joys of owning a TVR.
Questions
1.How do you get the pipe from the filter onto the copper pipe? On my car the pipe terminates just before the ARB and there is no way I can see to get access with my big mitts
to push the rubber pipe on – any ideas??
2.There is a black wire that links from the CD player (does not work) to the fuel sender. If I remove the CD player cut the white plug off and join the wires and reattach to the sender will it bugger up anything??
Cheers guys
Decided to change the fuel pipes on my 97 Chim as the ones in the engine bay are cracked
...
if these are worn then the others would benefit from updating plus I thought to flush the tank at the same time, what a PITA to get the tank out – observation - the sealant company must have hit hard times when TVR packed up.
I have a 4X2 inch horizontal hole in the boot to get a 20mm pipe through and why the hell is that little swan neck not be part of the tank fixing. If the 4X2 hole if made vertical the swan neck would fit and then you would have only one joint, ohh the joys of owning a TVR.Questions
1.How do you get the pipe from the filter onto the copper pipe? On my car the pipe terminates just before the ARB and there is no way I can see to get access with my big mitts
to push the rubber pipe on – any ideas??2.There is a black wire that links from the CD player (does not work) to the fuel sender. If I remove the CD player cut the white plug off and join the wires and reattach to the sender will it bugger up anything??
Cheers guys
Q1: Have you taken the anti roll bar off to give you more room? And remember the good old trick of making sure that you've spat into the rubber, or wetted it in some other way, to ensure that it's got a bit of lubrication (as the actress said to the bishop).
Q2: I removed the CD changer and wiring when I took out the fuel tank... don't remember what was connected to what, but I'd be tempted to leave well alone on the wiring front unless you really need to remove it ;-)
Q2: I removed the CD changer and wiring when I took out the fuel tank... don't remember what was connected to what, but I'd be tempted to leave well alone on the wiring front unless you really need to remove it ;-)
SILICONE KID said:
I thought the flow and return pipes are copper until they go to the gear box area.I was told the only fuel rubber hose running from the rear all the way through is the vent pipe to the carbon canister.or am i wrong.
They are or at least should be as you suggest,I changed the vent pipe to copper for most of its length and just fitted rubber fuel pipe at both ends.the less rubber pipe to perish the better I.M.O.Edited by SILICONE KID on Sunday 10th October 21:46
Hi Guys thanks for the feed back, 
AREA – Well I have now cut the wire and joined them, think I need to contact some one before I turn the ignition on, just to be sure.
SILCONE KID - your are right they are but the flow pipe on mine starts just after the rear ARB and is sandwiched between the floor pan and the chassis.
TJC46 – I agree, if I ever do a body off then I will change the routing of the pipes and reduce the amount of rubber pipe.
BliarOut – thanks for the offer of a rampage
, I would like too but one little problem, I live in Grenoble (South East) France, bit of a long 
May be one of these years I will attend a TVR meet in the UK and track you guys down..

AREA – Well I have now cut the wire and joined them, think I need to contact some one before I turn the ignition on, just to be sure.

SILCONE KID - your are right they are but the flow pipe on mine starts just after the rear ARB and is sandwiched between the floor pan and the chassis.

TJC46 – I agree, if I ever do a body off then I will change the routing of the pipes and reduce the amount of rubber pipe.
BliarOut – thanks for the offer of a rampage
, I would like too but one little problem, I live in Grenoble (South East) France, bit of a long 
May be one of these years I will attend a TVR meet in the UK and track you guys down..

Gassing Station | Chimaera | Top of Page | What's New | My Stuff




How you fixed for a spot of rampage next Saturday?