need more powerful fans on my baby???where to get them???
Discussion
The regular fans do work fine, so I'd suggest sorting out why yours don't. I've been on all sorts of fast runs, track days, tunnel runs, and almost stationary runs through London, and never had a problem.
You can get a lower temp otter switch to bring them on earlier, or get the device from Stephen Heath to control them. You might also want to add a manual override switch, but i have never needed one.
You can get a lower temp otter switch to bring them on earlier, or get the device from Stephen Heath to control them. You might also want to add a manual override switch, but i have never needed one.
chimaera1855
This may sound silly, but have you checked the fans are rotating the right way ?
When I checked mine one was correct and the other rotating the wrong way.
A strip of paper held near the fan when it's running soon shows you which direction it is pushing the air.
I only checked mine after reading on Pistonheads of someone else who had found the wiring was wrong.
To correct the fan rotation just swop round the two wires.
This may sound silly, but have you checked the fans are rotating the right way ?
When I checked mine one was correct and the other rotating the wrong way.
A strip of paper held near the fan when it's running soon shows you which direction it is pushing the air.
I only checked mine after reading on Pistonheads of someone else who had found the wiring was wrong.
To correct the fan rotation just swop round the two wires.
both rotating in the same way.i just wanted to upgrade to bigger fans.cause here the weather is really hot.when i on the aircon and with the kind of traffic jam the have here the lady gets a bit hot.nobody in uk makes more powerful fans???or from an other car model???i will ask my mechanic tomorrow about the low temp termostat.i dont like when my temp pass the 90 degres.i guess a fan controller isn't a bad idea.
sparkesp said:
I have the standard set up, and no problems..... otter cuts in at 90, fans on.... normal running temp of 60. Have done long runs, short runs, stationary in traffic, track, and no issues......
Normal running is not 60! if everything is working correctly, it should be mid 70s to 80 degrees if all is well, sounds like your thermostat may be stuck open.Andy
guys please topic topic topic!!!!where can i get more powerful fans?????here weather hot hot hot so any idea to keep the british lady a bit cooler.SILICONE KID already gave me one(at least when the car moves).tks.i want to keep it between 80 to 90 but dont want to pass the 90 degres.tks
How about additive to the coolent, a lot of track / racing cars use it to run cooler. Failing that an aluminium rad maybe the way to go. Would imagine the twin fans on the later cars are not going to be improved. Also worth a look at the cowls to be sure the fans are sucking through the rad and not bleeding air from around the sides.
ps if you have problems with a 4L a 5L produces a lot more under bonnet heat
ps if you have problems with a 4L a 5L produces a lot more under bonnet heat
http://www.spalautomotive.co.uk/
or
http://www.pacet.co.uk/
or
http://www.kenlowe.com/
or
http://www.demon-tweeks.co.uk/Motorsport/Cooling_S...
IIRC, OEM was Spal, 2x 12" on the newer cars, or 1 x10" & 1x 12" on earlier ones. You can probably go to 13" but You'll need to check dimensions and mounting solutions.
Look at getting one of these too: http://www.actproducts.co.uk/shop/aluminium-radiat...
Tim @ ACT is a very helpful chap and an ally rad will really drop your running temps. You will need to inform Tim if you're planning on putting different fans in as they'll need to put correct mounts on for them. I would order a pair of fans and have them shipped to Tim @ ACT. Get him to send them to Radtec (manufacturers his rads) and they will fabricate proper mounts for the new fans. Then get the whole lot shipped out to you from Radtec. If you still have issues, run with some water wetter in your coolant - it will improve your cooling efficiency quite a bit (available from Demon Tweeks).
or
http://www.pacet.co.uk/
or
http://www.kenlowe.com/
or
http://www.demon-tweeks.co.uk/Motorsport/Cooling_S...
IIRC, OEM was Spal, 2x 12" on the newer cars, or 1 x10" & 1x 12" on earlier ones. You can probably go to 13" but You'll need to check dimensions and mounting solutions.
Look at getting one of these too: http://www.actproducts.co.uk/shop/aluminium-radiat...
Tim @ ACT is a very helpful chap and an ally rad will really drop your running temps. You will need to inform Tim if you're planning on putting different fans in as they'll need to put correct mounts on for them. I would order a pair of fans and have them shipped to Tim @ ACT. Get him to send them to Radtec (manufacturers his rads) and they will fabricate proper mounts for the new fans. Then get the whole lot shipped out to you from Radtec. If you still have issues, run with some water wetter in your coolant - it will improve your cooling efficiency quite a bit (available from Demon Tweeks).
Edited by 450Nick on Monday 18th October 09:22
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




