Starting problems - anything else I should check ?
Discussion
Hi, a few months into Chim 450 ownership and grinning alot. But can't get it started. Have all ignition lights, and whirring from behind for a few secs so think I have fuel pump on. Will try rocking in gear to see if starter is stuck next but wondered if anything else I should look for ? Happened last week at fuel station, but did manage to get restarted after 30 mins, so assumed potentially a hot start problem or electrical problem (wrongly ?) as when I got home started 5 times on trot. Now a week later will not start from cold at all, but at least it's in the garage ! Thanks for any thoughts.
As I understand the hot start kit is to tak esome of the load off the relay in the immobiliser. Once you start having the hot start issues then you immobiliser relay is showing signs of fatigue. I had the classic issues, installed the hot start and found that generally it cured the problems. However, I did have intermittent issues, hot or cold. I had always assumed a loose connection related to the hot start kit. To cut a long story short I found that using the hot start kit connections to give a feed to the starter it always worked. My loose connection was really a tired relay in the immobiliser.
As the previous poster I have fitted a push button under the dash for the starter, and have never had a problem since (hot or cold).
As the previous poster I have fitted a push button under the dash for the starter, and have never had a problem since (hot or cold).
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


