Oops something went Phut!
Oops something went Phut!
Author
Discussion

fog66

Original Poster:

368 posts

229 months

Monday 18th October 2010
quotequote all
Changing the bulbs in the instruments tonight and I managed to short a bulb against the Speedo mounting arm, it fizzed a spark and the bulbs all went dead. The headlights and tail lights are also out except main beam works.

Everything else is fine. I've checked all fuses and they appear in tact, relay? If so which one and where?

Oh dear I am a clown!!! D'oh

dmjw01

4,473 posts

196 months

Tuesday 19th October 2010
quotequote all
I'm more worried about the capital "S" you put on Speedo. Does that mean you were wearing a pair of "budgie smugglers" while working on your car? You're weird!

smile

900T-R

20,406 posts

288 months

Tuesday 19th October 2010
quotequote all
Did that (I needed to change an instrument bulb and foolishly decided it was alright to hang the wiring & socket over the stainless steel dash panel when driving to the car accessory shop to get a replacement bulb) and like you, was left with no front and rear lights except main beam. Instrument lighting fuse was blown - replaced and presto, front and rear lights working again!

Brits and electrickery... rolleyeslaugh



Edited by 900T-R on Tuesday 19th October 06:50

fog66

Original Poster:

368 posts

229 months

Tuesday 19th October 2010
quotequote all
dmjw01 said:
I'm more worried about the capital "S" you put on Speedo. Does that mean you were wearing a pair of "budgie smugglers" while working on your car? You're weird!

smile
The capital S is a typo, just got a bit carried away with my typing. Nothing to do with my electric lunchbox fella, don't worry.

I've also checked ALL the fuses and non appear to be out.

Barreti

6,689 posts

268 months

Tuesday 19th October 2010
quotequote all
Change the dash fuses anyway. I chased an electrical problem for days after being convinced it wasn't a fuse because I'd check them all.

It was still the fuse though.

You'll kick yourself if you do the same so just for the sake of swapping it with another you should try it.

Barkychoc

7,848 posts

235 months

Tuesday 19th October 2010
quotequote all
can you vary dash brightness on chim?
If not fuse maybe something to do with variable resistance / voltage gone pop?

fog66

Original Poster:

368 posts

229 months

Tuesday 19th October 2010
quotequote all
Barkychoc said:
can you vary dash brightness on chim?
If not fuse maybe something to do with variable resistance / voltage gone pop?
No you can't change the brightness but there is a switch to turn them off, however this has no link to the headlights.

fog66

Original Poster:

368 posts

229 months

Tuesday 19th October 2010
quotequote all
900T-R said:
Did that (I needed to change an instrument bulb and foolishly decided it was alright to hang the wiring & socket over the stainless steel dash panel when driving to the car accessory shop to get a replacement bulb) and like you, was left with no front and rear lights except main beam. Instrument lighting fuse was blown - replaced and presto, front and rear lights working again!

Brits and electrickery... rolleyeslaugh

It turned out to be exactly the same, cheers.



Edited by 900T-R on Tuesday 19th October 06:50