Picked a fight with a Gsxr 1000, and didn't go to plan
Discussion
So I managed to pick a fight with a super bike, after we had a little play, We stopped at a set of lights, only to see smoke pouring from my Chim, turned engine off ran out, only to find smoke pouring
from my glowing red hot brakes and small flames coming from the backs,
So im needing to upgrade my brakes, what's the best and cheapest way to do this?
I was thinking picking up some callipers off some thing else, e.g porsche 944 as i know there 4 pot brembo's modding them to fit, with some bigger discs vented and drilled, and new pads,
Or am I over thinking this and just need decent pads and discs?
Also do the 500 Chim/Griff use different system?
And before any ones says but this and that, bear in mind I got about £200-300 to play with, but im very handy with a spanner
Alex
Edit there standard 400 chim brakes with freodo pads, fitted by previous owner
from my glowing red hot brakes and small flames coming from the backs,
So im needing to upgrade my brakes, what's the best and cheapest way to do this?
I was thinking picking up some callipers off some thing else, e.g porsche 944 as i know there 4 pot brembo's modding them to fit, with some bigger discs vented and drilled, and new pads,
Or am I over thinking this and just need decent pads and discs?
Also do the 500 Chim/Griff use different system?
And before any ones says but this and that, bear in mind I got about £200-300 to play with, but im very handy with a spanner
Alex
Edit there standard 400 chim brakes with freodo pads, fitted by previous owner
Edited by Alexdaredevilz on Tuesday 19th October 16:48
Alexdaredevilz said:
4Lmike said:
the only thing i will say is....'you picked a fight with a gsxr 1000!!' silly boy
I was doing fine on the corners with him no problem Lets just hope you were lapping roundabouts any straights would get very embarrassing, very quickly.
£100 OVER BUDGET PLUS A SET A PADS - BUT STILL A BARGAIN.
http://cgi.ebay.co.uk/4-Pot-Caliper-Race-Brake-Kit...
THAT'S DEFINITELY WHAT I WOULD FIT.
http://cgi.ebay.co.uk/4-Pot-Caliper-Race-Brake-Kit...
THAT'S DEFINITELY WHAT I WOULD FIT.
Chimpaholic said:
£100 OVER BUDGET PLUS A SET A PADS - BUT STILL A BARGAIN.
http://cgi.ebay.co.uk/4-Pot-Caliper-Race-Brake-Kit...
THAT'S DEFINITELY WHAT I WOULD FIT.
As supplied by 'Keri'http://cgi.ebay.co.uk/4-Pot-Caliper-Race-Brake-Kit...
THAT'S DEFINITELY WHAT I WOULD FIT.
add VAT, pads and you need the hoses as the threads are slightly different = near £550.
_DeeJay_ said:
Alexdaredevilz said:
4Lmike said:
the only thing i will say is....'you picked a fight with a gsxr 1000!!' silly boy
I was doing fine on the corners with him no problem Lets just hope you were lapping roundabouts any straights would get very embarrassing, very quickly.
It was just abit of fun
That ebay kit is nice, but I just don't have that much to spend right now, after 3 months of buying bits and bobs im running out of money, but at least the list is down to 6 things now, ITS ALMOST DONE!!
Alex
Find either some brakes off a later 500 car or the Ford units with 887/888 stamped on them (search on here for more info than I'll ever remember)
Get a pair of EBC GD150 front rotors and EBC Red Stuff pads.
Swap the rubber brake lines for braided
Use DOT4 fluid
I swapped all that on my 4.3 and the change was staggering. I can stand the car on its nose without any drama and the balance is still fine.
Be aware though, this improvement still cost me £30pa on my insurance premium because its a modification
Get a pair of EBC GD150 front rotors and EBC Red Stuff pads.
Swap the rubber brake lines for braided
Use DOT4 fluid
I swapped all that on my 4.3 and the change was staggering. I can stand the car on its nose without any drama and the balance is still fine.
Be aware though, this improvement still cost me £30pa on my insurance premium because its a modification

^^^^^^^^^^^
^^^^^^^^^^^^^^
I've obtained some of these from a 4x4 Cosworth (stamped 888/887), from ebay for about £50.
They are massive in comparison to the standard calipers.
I haven't fitted them yet as I need a new brake fluid resevoir
Have a look here
^^^^^^^^^^^^^^I've obtained some of these from a 4x4 Cosworth (stamped 888/887), from ebay for about £50.
They are massive in comparison to the standard calipers.
I haven't fitted them yet as I need a new brake fluid resevoir

Have a look here
Brilliant info there guys thanks alot,
But im abit confused to the size of the disc, as the link show it done with 283mm, post above says 260mm
and ebc direct website is saying 278mm,
Will they all fit the 887/888 callipers? also what cars can i find these callipers? granada? sierra? escort? also what years/mk shall i search for?
Also what's to be done with the rears? or is it same again 887/888 with 260/278/283 discs?
Many thanks
Alex
Edit ive just seen a 273mm ford style aswell
But im abit confused to the size of the disc, as the link show it done with 283mm, post above says 260mm
and ebc direct website is saying 278mm,
Will they all fit the 887/888 callipers? also what cars can i find these callipers? granada? sierra? escort? also what years/mk shall i search for?
Also what's to be done with the rears? or is it same again 887/888 with 260/278/283 discs?
Many thanks
Alex
Edit ive just seen a 273mm ford style aswell
Edited by Alexdaredevilz on Tuesday 19th October 20:44
887/888 calipers are from mk1 mondeo early '90s. Not sure what else though I believe escort cossie. Discs are 283 or 285mm depending what you read and from a 3dr cossie or RS500 as someone above said. You may need 2mm washers between the caliper and carrier as I did to get the caliper central on the disc. DS2500 pads are the (bloody expensive!) way ahead. If the budget is that tight then original hoses match straight up.
Andy.
Andy.
Sparky99 said:
Just a though. if heat is the problem why not have some ducting to direct cool air onto the discs. Its a standard thing on many performance cars. Could be a cheap mod. Just a bit of chopping here and there!!
I was thinking about removing the front indicator and having some sort of ducting to the brakes, but haven't really looked in to it yet just a ideaGassing Station | Chimaera | Top of Page | What's New | My Stuff






)