500. wheel bearings
Discussion
I brought mine from Burton Power http://www.burtonpower.com/company_info.aspx great guys, very helpful 3 days for the parts arrived in France 
Chassis33 is right, you would be better to crack the nuts while the wheels are on the car with a good brick in front of the wheel.
Mine were impossible to break so I took them to a local garage who used a air gun for lorry wheels and even this was tested, the poor guy nearly went round with the gun on the first try
.. Tightening them up I used the same garage, with a torque wrench 5ft long me sitting in the car with the foot break applied. Good luck

Chassis33 is right, you would be better to crack the nuts while the wheels are on the car with a good brick in front of the wheel.
Mine were impossible to break so I took them to a local garage who used a air gun for lorry wheels and even this was tested, the poor guy nearly went round with the gun on the first try
.. Tightening them up I used the same garage, with a torque wrench 5ft long me sitting in the car with the foot break applied. Good luckGassing Station | Chimaera | Top of Page | What's New | My Stuff



