Got a pair of 4 pit cossie brakes, having some issues
Got a pair of 4 pit cossie brakes, having some issues
Author
Discussion

Alexdaredevilz

Original Poster:

5,697 posts

210 months

Wednesday 27th October 2010
quotequote all
I spent to last 2 days refurbing theses callipers, they come out really nice,

Went to mount and check clearances with a friends 280mm disc he had in the garage hes not sure where it came from, he guessed fiesta rs turbo ( old model )

It fits the hub no problem but its 2-3mm out of line (height?) with centre of calliper,

Ive done some googling and worked out there's several different ford 278-283mm disc heights ranging from 36mm - 53mm which is the one I want? or is it going to be trial and error till I get the right one

I know I can space the calliper out with a washer but I cant go the other way ( that make sense? ) and this is the problem im having

Thanks

Alex

Marty V8

578 posts

217 months

Thursday 28th October 2010
quotequote all
If you've got Sierra Cosworth 4 pot calipers, then they work with 283mm discs. I think the thickness is 24mm but am prepared to be corrected on this.

As a guess, you may need a bracket bolted to the hub that moves the caliper inboard from its current mounting position.

Edited by Marty V8 on Thursday 28th October 00:29

Alexdaredevilz

Original Poster:

5,697 posts

210 months

Thursday 28th October 2010
quotequote all
Ive got it lined up with the holes no problem and fitting the disc

I just need 2-3mm less offset

biper

2,097 posts

248 months

Thursday 28th October 2010
quotequote all
Put a spacer between the disc and the hub.

Alexdaredevilz

Original Poster:

5,697 posts

210 months

Thursday 28th October 2010
quotequote all
biper said:
Put a spacer between the disc and the hub.
Instead of going through the hassle of getting a spacer machined up I could just get the right disc?

Barkychoc

7,848 posts

235 months

Thursday 28th October 2010
quotequote all
Look at
Http://www.brakeparts.co.uk

All discs etc you look at on there have dimensions.

The only issue you might have is that I believe the hub carrier was a special on the cossie but I don't know why.

biper

2,097 posts

248 months

Thursday 28th October 2010
quotequote all
Alexdaredevilz said:
biper said:
Put a spacer between the disc and the hub.
Instead of going through the hassle of getting a spacer machined up I could just get the right disc?
You could probably by them from Deamon Tweeks or the like.

Edited by biper on Thursday 28th October 16:18

Alexdaredevilz

Original Poster:

5,697 posts

210 months

Thursday 28th October 2010
quotequote all
biper said:
Alexdaredevilz said:
biper said:
Put a spacer between the disc and the hub.
Instead of going through the hassle of getting a spacer machined up I could just get the right disc?
You could probably by them from Deamon Tweeks or the like.

Edited by biper on Thursday 28th October 16:18
Its not getting the discs that's the problems, its knowing which correct offset to order im stuck with

Alex

biper

2,097 posts

248 months

Thursday 28th October 2010
quotequote all
When you say the off set, do you mean the total hieght.

Edited by biper on Thursday 28th October 19:19