Reviving Door Seals?
Discussion
You don't need to revive the seals they leaked like that from new.
Water gets trapped somehow and eventually rises above the seal finding its way into the car.
You need to create an escape path for the water.
The trick is to use a soldering iron to puncture the seal where it leaks then put a few drops of superglue in the hole you've just made.
Apply pressure with a pencil vertically against the seal to stick the hollow seal together and create a thin channel for the water to escape.
Do this at both ends of the lower horizontal part of the door seal an inch before the seal starts to rise around the door aperture.
No more leaks, well no more leaks from the door seal that is.
Water gets trapped somehow and eventually rises above the seal finding its way into the car.
You need to create an escape path for the water.
The trick is to use a soldering iron to puncture the seal where it leaks then put a few drops of superglue in the hole you've just made.
Apply pressure with a pencil vertically against the seal to stick the hollow seal together and create a thin channel for the water to escape.
Do this at both ends of the lower horizontal part of the door seal an inch before the seal starts to rise around the door aperture.
No more leaks, well no more leaks from the door seal that is.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


